Hi I cascade thru several problems as I try to reload WSJT after some odd behavior with the latest MacOS update. I got thru the memory change adjustments in Terminal and got the xmit working after

RSPduoEME User Instructions David Warwick G4EEV (For Software Version 1.31) December 2020 reading now thank you very much YZ -- -- Bob KD7YZ in NE Kentucky

I do the same, because I work lots of CW and RTTY contests. With rig-split it would leave the radio (a K3) when I quit FT8, which is a PITA. 73, Jim K9YC

I'm using 2.5.0 with Windows 10 Pro 64 bit on an old laptop computer originally released with Vista. {That's old!} I do allow automatic updates of the Windows system and have suffered ZERO, repeat

One of the reasons I don’t run rig-split, is because I use VFO-B for other things, and casual operation on VFO-A. Fake it, keeps it this way and I never have to question what is going on with the

So what is so important about VFO B? Doesn't VFO A have the same capability? If so, then that which is so important on VFO A can be done on VFO B. Just let the software do its job and learn to

Hi John, which option for "Preferences->Radio->Mode" do you have checked? 73 Bill G4WJS.

I just noticed that on xmit, the IC7300 goes out of digital mode. I.e., USB-D goes to USB on xmit. OK,,,what I found was that in Preferences, under Radio/Mode, USB was lilsted as mode instead of

Any thoughts on the lack of xmit? Must be an interface problem…no xmit on FLDigi either. I did not change any parameters on the IC 7300. It’s prob obvious and staring right at me.

Bob, you don't need to wait, on this Github page there is a zip file you can download which has the program in it: https://github.com/g4eev/RSPduoEME Click the "Download" button

Thanks Bill. I went to site and filled out a form. Ostensibly he gives me a link to D/L it. -- -- Bob KD7YZ in NE Kentucky

Hi John, I hope you followed the new shared memory configuration instructions in the WSJT-X v2.5.0 installer DMG ReadMe.txt file, those should survive reboots and o/s upgrades better that the prior

Hi Bill. I muddled thru as usual and got WSJT-X receiving. So I guess I did the memory adjustment OK. I now have good decode but zero xmit out. I have checked the audio codecs and the MIDI

Hi Bob, AFAIK the only way to interface an SDRplay RSPduo to to MAP65 currently is to use a utility developed by David, G4EEV: https://www.qsl.net/g4eev/index.html 73 Bill G4WJS.

Hi John, your screen capture is too low resolution to read. Why not just select, copy, and paste the test from the terminal window rather than wasting space on this list by attaching images? Are you

A new update on Mac yesterday...WSJT became unstable...kept requiring me to re-enter Test CAT after each transmission. Then I noticed an audio beep at the end of transmission heard thru the computer

I'm looking at the MAP65 v3.0 setup screen and can't figure out how to get it to read my SDRPlay 'RSPduo" anyone wish to offer guidance? Email mycall AT ARRL blah blah OR here, either way TU --

Peter, Here’s an article that touches on the USB settings – sounds like you’ve covered most, perhaps not

Hi Pete, do you have an HDMI monitor? Does the problem go away if you disable the energy saving on the HDMI monitor? 73 Bill G4WJS.

Me too! I've disabled USB selective suspend in Control Panel, Power Options, Hi-performance plan, advanced settings. I've disabled power saving in Device Manager, USB (various). If I don't use