What a stupid restriction for a general use module. Unbelievable. Outlook Laptop Gil W0MN Hierro candente, batir de repente 44.08226N 92.51265W EN34rb

Hi Bill, I just checked. Yes, WSJT-X is allowed access under the privacy settings. Wayne, N4HCR

Hi Ricky, the Hamlib developers have decided that to use their library the rig must be on VFO A. I understand that this is a new restriction but I doubt that it will change. Is there any particular

Currently using WSJT-X version 2.3.0 oc42df. After upgrading to 2.5.0 the software pre-selects VFO-A at start up instead of VFO-B which the rig is set to. Previous versions always read the rig

Are you running it in windows 10 and suffered an update lately? If so, try downloading and running “DPC Latency Checker”. Run it before start WSJT-X and keep it running… -- Luis F. Arango

Hi Wayne, make sure that WSJT-X is allowed access to microphone devices in the Windows Camera and Microphone Privacy settings. 73 Bill G4WJS.

I just changed to a new computer for using with ham radio, and I’ve installed WSJT-X. It’s a Windows 10 computer, the radio is a Yaesu FT-920. I’m using a SignalLink USB for the external sound

Hi all, Have had absolutely no luck with WSJTx, so changed to JTDX and no problem, working just fine. Have made many contacts. Not sure why JTDX is working and WSJTx is not, but a good outcome for me

Peter, The SAC PC-1000 autocoupler is the real prize in my 630 meter station. My transmitter is a SAC SS-250C with only 25 watts output and the EIRP is estimated somewhere between 20 dbm and 26 dbm,

Hi Bill, Signal reports in FT8 are signal to noise ratio, the differences you're seeing are usually the result of high noise levels on the other end. Another reason would be if the other station is

Bill, Bingo!!!! I went down to the basement and the SignaLink USB delay was set half way between min and max (pointed straight up). I rotated it completely counter clockwise to minimum and everything

I'll try that Jeff. It's the special formula W1ND3x right?

No problem with regular transmissions, only with the tune button. Everything else seems to work fine except for every once in a while for some reason when I click to log a QSO it starts trying to

Bill, I will check that. I may have been moved but generally that is where it is. Thank you again. Mike -- Mike - KM2B

William, Good thought! Thanks. I will check for RFI this evening or in the morning and let you know. Appreciate your response -- Mike - KM2B

Hi Bill, Magic! Thanks so much! Decodes now work on not only a single wav file, but also on a list of wav files which together contain the signal. Can I find a description of the meaning of the spot

Hmmm, my IC-7610 states more than 3500 Hz and does receive that entire bandwidth. I have never restricted the width. There are times that I receive similar TX and RX reports but they are rare.

Hi Bill, excessively optimistic signal reports are often due to restricted receiver bandwidth. The FT8 decoder relies on a reasonably flat receiver bandwidth across the

I don’t feel so bad…. I have been giving +10 to +20 but receiving -15 to -20 dB. Bill WB6JJJ

Hi Rob, here's an example of usage with the FST4W-1800 sample file that you can download with the WSJT-X v2.5.0 "Menu->Help->Download Samples ..." tool: