I'll try that Jeff. It's the special formula W1ND3x right?

No problem with regular transmissions, only with the tune button. Everything else seems to work fine except for every once in a while for some reason when I click to log a QSO it starts trying to

Bill, I will check that. I may have been moved but generally that is where it is. Thank you again. Mike -- Mike - KM2B

William, Good thought! Thanks. I will check for RFI this evening or in the morning and let you know. Appreciate your response -- Mike - KM2B

Hi Bill, Magic! Thanks so much! Decodes now work on not only a single wav file, but also on a list of wav files which together contain the signal. Can I find a description of the meaning of the spot

Hmmm, my IC-7610 states more than 3500 Hz and does receive that entire bandwidth. I have never restricted the width. There are times that I receive similar TX and RX reports but they are rare.

Hi Bill, excessively optimistic signal reports are often due to restricted receiver bandwidth. The FT8 decoder relies on a reasonably flat receiver bandwidth across the

I don’t feel so bad…. I have been giving +10 to +20 but receiving -15 to -20 dB. Bill WB6JJJ

Hi Rob, here's an example of usage with the FST4W-1800 sample file that you can download with the WSJT-X v2.5.0 "Menu->Help->Download Samples ..." tool:

Ooops, I forgot the -F 20, but adding that doesn't affect the output: jt9 -L 1400 -H 1600 -f 1500 -d 1 -F 20 -p 120 -W 211002_0350.wav <DecodeFinished> 0 0 0 -- Rob

Hi Bill, Unfortunately, adding those flags doesn't affect the output: jt9 -L 1400 -H 1600 -f 1500 -d 1 -p 120 -W 211002_0350.wav <DecodeFinished> 0 0 0 Rob -- Rob

Hi Rob, you will need to set the frequency and decode depth arguments. -L HERTZ--lowest HERTZ Lowest frequency decoded (JT65), default HERTZ=200-H HERTZ--highest HERTZ Highest frequency

Hi Mike, make sure you have the DELAY knob on the SignaLink USB interface set to minimum. 73 Bill G4WJS.

Could this be an effect of RFI? Your radio moves to transmit in the middle of the passband, and fails to move back because of RFI corrupting that command? You say nothing else has changed, but

Bill, Thank you. Thank you for the clarification of the frequency shift. Yes, I have been using "fake it" to split the transceiver transmit frequency from the receive frequency for about two years

I noticed a similar thing on the eveningof 10/02 on 10m FT8. There was a good opening from W1 land to LU and PY land,and I was getting -15 to +05 and I was giving out +20 and most around +10.

Hello, I am trying to add FST4W support to version 3.0 of my wspedaemon service (https://github.com/rrobinett/wsprdaemon ) run by many of the top spotting sites worldwide. My goal is to encourage

just downloaded V2.5.0 and think the problem, also reported by others, is still there :-(( Stopped WSJTX and started it again and then all is fine ...

Same here, v2.5.0 downloaded and installed perfectly. One thing I do notice is that there seem to be a much wider range of received signal strengths, with quite a few lower than they might have been

Mark, Thanks for posting the information about your MF station. I was particularly interested in the re-used Southern Avionics Company NDB components since a small group which I formed a couple of