Everyone, I am using an FT-1000MP with wsjt-x (multiple versions) with a SignaLink USB audio interface. You can find my Radio Setup Screen and Audio Setup Screen and a video of the behavior

I've experimented a little with this: - If I do this with my recent QSO partner in the first hash, wsjtx will pop up a warning (at the QSO-partner) that EU VHF mode should be turned on. I don't

>I've noticed a similar problem. Running the "Pwr" slider down and up seems to remedy it for the session. Hi Jason, Have you tested possible RFI? Turning down power or using dummy load? 73,

When I decided to operate on the newly opened 630 meter band, the lack of commercial amateur radio equipment for the bands below 160 meters forced me to get creative So here's the approach that I took

It must be a dirty virtual slider pot. Get out the virtual contact cleaner George and give it a spray. <Grin> Jeff Townsend WB8LYJ

I've noticed a similar problem. Running the "Pwr" slider down and up seems to remedy it for the session.

Eddy, Check the firmware version installed in the Icom 7800 and compare it with the version expected by hamlib. Icom made major changes beginning with v 3.10 for the 7800. Some software now expects

Hi James I refer you to DUBUS Volume 4/20 page 97. "Optical communication with FST4 and FST4W". The Q65 tests were an extension of these tests from FST4 to Q65. In 300 second periods there is

Please try WSJTX-2.5.0 -- there was a fix for the 7800 after 2.4.0 Mike W9MDB

Hi Bill, My apologies for this late reply. No reply from any other user with the ICOM 7800. We had to find some time to get together and sort things out. We also thought better wait until

That's your choice, and your loss. I've been at this for 65 years, and grids are a VERY new thing in ham radio. I chase grids on 6M. 73, Jim K9YC

Dave, James VK7MO has done a lot of work on this. Google will find references. 73 Charlie DL3WDG

Please share on list if possible, this also interests me. 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist, RFI ARRL Asst. Director, NW Division,

Reading the Q65_Quick_Start guide, I saw reference for Optical Scatter using the 300 second period with A tone spacing. Having worked with light communications, I was curious. So far I have not

Hi Charlie, You can just uncheck the Call 1st checkbox. You now have a choice as to which station to answer to. 73, Sam W2JDB

Charlie, you are going to have to give us an example of that. If "Call 1st" is not enabled then a response to a CQ never initiates any auto sequencing, you as the operator have

I do, but when the calling station responds it sets auto sequence back on. Time to select a station to work is limited, hence I want the function to filter out those I am not interested in before the

I know… a grid square is though. 73 Charlie G4EST www.g4est.me.uk Stay safe out there

Its your preference, and as such, just uncheck the 'AutoSeq' and/or 'Call1st' box(es) and manually do what you prefer. Neil, KN3ILZ

Charlie here is the US a call sign is no longer a indicator of location. Bob - wd6dod