Please share on list if possible, this also interests me. 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist, RFI ARRL Asst. Director, NW Division,

Reading the Q65_Quick_Start guide, I saw reference for Optical Scatter using the 300 second period with A tone spacing. Having worked with light communications, I was curious. So far I have not

Hi Charlie, You can just uncheck the Call 1st checkbox. You now have a choice as to which station to answer to. 73, Sam W2JDB

Charlie, you are going to have to give us an example of that. If "Call 1st" is not enabled then a response to a CQ never initiates any auto sequencing, you as the operator have

I do, but when the calling station responds it sets auto sequence back on. Time to select a station to work is limited, hence I want the function to filter out those I am not interested in before the

I know… a grid square is though. 73 Charlie G4EST www.g4est.me.uk Stay safe out there

Its your preference, and as such, just uncheck the 'AutoSeq' and/or 'Call1st' box(es) and manually do what you prefer. Neil, KN3ILZ

Charlie here is the US a call sign is no longer a indicator of location. Bob - wd6dod

Not exactly easy in the 2 second gap. I actually do this but the calling station often repeats the reply (not exactly saving time) and the whole rigmarole starts again. You can also close the program,

Sorry, but I don’t care, my request stands in that I want a way to ignore responses which are not of the standard format and do not include a grid square. It’s called choice, they choose not to

Charlie, You can choose to ignore them, by disabling TX before you have a chance to reply, or double-clicking on the call you do want to answer. The choice is all yours. 73 Phil GM3ZZA

Charlie, you are either putting word into my mouth I did not say, or you are misunderstanding. A Tx1 message does not always contain a gridsquare. A user can choose not to

Bill No I'm not, you are talking semantics here. I am referring to the sequence messaging and as it's a prescribed order it is in itself a protocol, albeit not a data one. It is I and others it seems

Hi Dave, we don't really expect users to read them, but at least we can point them out when they do happen cover the issue being asked about, hi. 73 Bill G4WJS.

Thanks Bill Guess I should read the incuded documents... 73 Dave W4WLC

Hi Dave, instructions to configure shared memory parameters for your system are included in the ReadMe.txt file on the installer DMG. 73 Bill G4WJS.

Bill Trying to install WSJTX 2.5 on the Mac laptop. It has never had the WSJTX program on it. The topic should have said 2.5 not 2.4. Dave W4WLC

<snipped part answered separately> Hi Ralf, you can't send 0 or 1 for the report & serial word, it's not that flexible. The report part must be one of 52, 53, 54, 55, 56, 57, 58, 59. A token in

Or to 73. Ralf -- Dr. Ralf Schlatterbeck Tel: +43/2243/26465-16 Open Source Consulting www: www.runtux.com Reichergasse 131, A-3411 Weidling email:

Hi Ralph, that is already implemented - see the Location(11) message in the WSJT-X UDP Message Protocol: https://sourceforge.net/p/wsjt/wsjtx/ci/master/tree/Network/NetworkMessage.hpp#l406 You must