Hi Mike, Below is what returns when I enter the strings into the text editor window. I'm not sure I'm entering the string correctly, as I'm a novice at programming the Pi4. Do I need to change

Oh, absolutely, while Win10 has it's issues, Win7 support ended Jan 14, 2020, so it's no longer an OS our business supports. But I didn't want to go down the OS rathole, and some people can't or won't

What reasons? Win10 is terrible.... Cheers, Peter - VK2AN

Ahhh,yes. Sorry but I still would drop Win 7 for other reasons. Outlook Laptop Gil W0MN Hierro candente, batir de repente 44.08226N 92.51265W EN34rb

Sounds like RFI, does it happen if you reduce power to (near) zero or use a dummy load? 73, Willie N1JBJ

Hello Everyone, I have had the FLEX 6400 and 6300 for years and this is the first time I am having this problem after making thousands of contacts. It just started recently...When transmitting, I

I have very good luck calling CQ below 500 Hz and above 2500 Hz when bands, especially 20m and 40m, are congested. About half of those calling me are in the central part of the band and operating

Hi Paul, Haven't heard your sigs lately. My 137 antenna is really lousy but I get into the States regularly on 476. I have redone the whole setup and have three completely separate instances - before,

Bill - sorry for missing the obvious. Raising the Tx gain worked.. John Vlahos (510) 415-1703m john@...

Win7 or later. No longer supports XP. 73, Willie N1JBJ

John, you can't be "losing control of the app", that makes no sense. The SignaLink USB handles PTT, all you need do is ensure the Tx audio level is high enough to trigger

Bill – thanks I tried that and it appears to send the reply packet to a CQ, then fires the PTT again switch in a few short bursts and then I lose control of the app until reset the Signalink…

Hi Mark, ah OK, yes I forgot about that. You can't build libgcc7, which is a dependency for virtually all of the gcc version builds, on Big Sur. That means that it is not possible to

Hi John, if you are using a SignaLink USB interface then you should be using "Settings->Radio->PTT Method->VOX". 73 Bill G4WJS.

When using the latest Big Sur install with xCode 13 the command sudo port install autoconf automake \ libtool pkgconfig texinfo gcc5 asciidoc \ fftw-3-single +gcc5 libusb-devel fails when trying

Any help would be greatly appreciated: Everything was working just fine on FT8 with the Yaesu FT-890, Signalink USB and HRD. Played around with DM780 a bit and now WSJT-X hangs on PTT and I'm forced

Check the audio input Sent from my Samsung Galaxy , an AT&T LTE smartphone

I would certainly look at your audio settings since windows notoriously changes those. Darl NA8W

I am trying to run frequency calibration. Before starting there was no fmt.all file in the WSJT-X log directory. Running frequency calibration seemed to work, but some frequencies had insufficient

Issue more likely to be the Windows audio settings. W7 and 10 often mix up the sudio streams after updates. Check your audio settings first