Rather new to WSJT. Running a Mac M1 Mini and an Icom 7610. When I call a station and it seems as if I'm in that 2 second window, the TX indicator on WSJT indicates a transmission.....but in fact it

Hi everyone, I am trying to run multiple instances of WSJT-X to decode very weak signals on 137Khz. I have been running 2 instances (one WSPR and one FST4W-30) on a Windows 7 laptop OK, but when I add

I was trying to ask the original poster , who mentioned they were having trouble with wsjt and flrig.... he was having trouble with json files, but posted to wsjt group. maybe he posted to wrong

Hi Gene, Just a snapshot here in Finland 24 h on 20m band almost 150 000 messages. High end is limited by my rig and wsjt-x waterfall setting. I would say quite a flat distribution. 73,

1) A lot of DX stations seem to prefer below 1KHz. Also Fox/Hound mode (also usually DX) requires them to stay below 1KHz. So some people try and keep that free for the DX stations. 2) As mentioned

I'm guessing you are probably using Data/Pkt mode in WSJT-X. Many rigs have limited bandwidth. Some can adjust that bandwidth. What rig do you have? What are your bandwidth settings? Mike W9MDB Hi

Dave, Like the other station, all versions ofWSJT-X work directly with my TS-590SG for CAT control, both on Windows 10 andUbuntu LINUX using the USB cable. I do not use flrig. Joe, K1YOW

Hi Marty, one reason may be that users who do not have CAT control of their rigs are following our advice to use Tx audio offsets above 1500 Hz. This ensures that any unwanted audio harmonics are

Simples, you are transmitting an audio tome on an SSB transmitter, the bandwidth of the SSB transmitter is roughly 300Hz to 3Khz, anything outside that will not be transmitted or severely

Hi - I have been using FT8 for 4 months on 40 & 20 meters and notice that signals bunch between 1 kHz and 2 to 2.5 kHz. Can someone explain to me (or point me at some good write-ups) as to why this

Dave, All I use with my 590SG is the USB cable. I start N3FJP first then start WSJT and they talk, control the 590, do a QRZ lookup & log each contact. No DB9 cable used at all and no

are you using flrig for cat control in the older version of wsjt?? why not go direct to radio from wsjt.... just wondering Dave Garber VE3WEJ / VE3IE

I still have problems with FLRig with this json files on the log directory.

I too run just wsjt on Linux to control CAT through USB on my TS590SG. I do not use a separate cable for anything, everything is through USB and I only run wsjt, not any other software. Larry

v2.5.0-rc6 FT8 Hold-Tx Auto-Seq Windows-10-Pro twice I've noted that after RRR is sent that wsjtx ceases to xmit and TX5 is not issued. fwiw, "disable TX after 73" remains unchecked. I am on 144.174

There is no need to run arcp softwarewhile running WSJT. I operate WSJT-X modes just fine running WSJT-X softwarestand-alone just using a USB cable to connect my TS-590SG to a Windows 10 orLINUX

regardless of db9, still does not explain my original question why the need to run arcp software while running wsjt Dave Garber VE3WEJ / VE3IE

Hi Charles, W5BAA What a great project! I've started to collect components in order to build the "Pocket FT8". I'll announce my results in this group. 73 OZ1BXM Lars Petersen

Hi Tom, My first Hamradio PC runs also only Win XP prof Sp3. And I have WSJT-x 2.1.0 running perfect. For me no need to have a later version ! I use WSJT-x only for

I think it may have been ks5z. the grid square shown on psk reporter for k55z and ks5z on qrz, are both the same. try emailing him. Anthony - n1IG