Hi Mike, have you installed the 64-bit version of WSJT-X? Have you checked if the required Microsoft Visual C++ redistributable is installed? Details in the WSJT-X User

Hi Stan, the "Settings->Radio->Transmit Audio Source" is only relevant for a small number of rigs where there are two CAT Tx commands and the audio source depends on which is used to key the rig. You

I am having problems resolving the error that SSL/TLS is not installed, when retrieving the LoTW user activity CSV file. I have followed all of the recommended fixes several times. I have uninstalled

I finally got around to tinkering with my Raspberry PI 4, the current RC of WSJT-X compiled from source and my IC-7300. I haven't tried it with my TS-590SG to see if the results are the same.

Hi Martin, No additional CI-V involved - but good thinking and something to be aware of. regards Tim On 16/9/21 4:45 am, Martin G0HDB wrote: -- VK2XAX : QF56if

Hi Michael, Good question! - I'll investigate this path further. thanks Tim On 16/9/21 12:43 am, Michael Black via groups.io wrote: -- VK2XAX : QF56if :

On Wed, Sep 15, 2021 at 03:49 PM, Michael Black wrote: PKTUSB is the hamlib name for any data mode on all the rigs.Thanks for the clarification, Mike. A further thought re: Tim's original posting -

My mistake I use VB-Audio. The free version of VAC cannot be used for TX as it sticks extra audio in the path. I think it’s $25 to get a “clean” version. 73 Phil GM3ZZA Sent from Mail

I use com0com for the control. Virtual Audio Cable gives you one cable for free. For a small donation you can get the second cable (needed for TX and RX). 73 Phil GM3ZZA Sent from Mail for

PKTUSB is the hamlib name for any data mode on all the rigs. Mike W9MDB On Wednesday, September 15, 2021,

On Wed, Sep 15, 2021 at 12:41 PM, Tim wrote: Hi all, I'm getting random disconnects with the obligatory pop-up window when WSJT looses contact with the radio.[Snipped] Hi Tim, I have no knowledge or

USB going to sleep perhaps? https://askubuntu.com/questions/395180/how-to-manage-usb-powering-for-sleep-mode Mike W9MDB

Hi Bill, :) that was the 1st thing I checked, and its disabled. cheers Tim -- VK2XAX : QF56if : ITU59 : CQ30 : BMARC : WIA

Pete, I use my SDRPlay RSPdx receiver with WSJT-X and it works well. I implement the CAT and audio paths via free versions of VSPE and Virtual Audio Cable, respectively. The SDR program, SDRuno,

Pete, There are two issues ... audio and control. For audio, one generally needs to route audio from the SDR to WSJTX using one of the "Virtual Audio Cable" products. Your SDR software should have

I think a right-click on the frequency list is needed, suggest you try that. -- Brian G8SEZ

If only it was that simple. Not a solution in this case. That comment refers to programmatically setting mode. Not a user operation. 7 3 Bob N2SCJ

if it has audio outputs, or a connection to add an external, like a signalink, I see no reason why it cou;ld not receive at least. have you tried it? Dave Garber VE3WEJ / VE3IE

Hi Tim, do you have "CI-V Transceive Mode" enabled on your IC-7300? It should be disabled. 73 Bill G4WJS.

Hi all, I'm getting random disconnects with the obligatory pop-up window when WSJT looses contact with the radio. I have an IC7300 s/w version 1.4, connected via USB to my PC running Ubuntu 20.04