Gene, thanks for the log file. Surprised to find you are using HRD for rig control, you had not mentioned that. Did this problem start happening after an update to HRD? 73 Bill G4WJS.

Experimental 2.5.0 solved my K4 problem but it timed out on August 31. The current release is 2.4.0 so I'm back to square 1. Is there a way to extend the lifetime of the experimental release or will

Hi Mike, Ok, hope all goes smoothly. If you ever (I doubt it) need any info, please don't hesitate to ask. 73, Sam W2JDB

That has never been implemented in hamlib but it's on my list for doing it in 4.4. It's a bit of a major change since there's no polling inside hamlib right now but that may change too. Mike W9MDB

Hi Mike, That sounds good. I also set transceive ('1a05007101') on and use Cmd x'00' and x'01' to accept unsolicited Frequency and Mode changes for the selected VFO. That relieved the need to read

That's what hamlib does now. I added some change just a couple of weeks ago that completely implements this and we don't see any VFO swapping anymore on WSJTX or JTDX. So it will be in the next

Hi Gene, I would never swear to it, but I do know how its supposed to work as I wrote my own interface for the IC7300 for my home brewed logging program. For the IC7300 I used the new CAT cmds x'25'

Bill I have been using "nDAX" and "nCAT". https://github.com/kc2g-flex-tools

Sam: > That may be why you are getting intermittent problems when switching offsets that quickly where the software has to actually change the un-selected VFO frequency. It is a 7300 about 4 months

Sam: Icom 7300 Bill: Files sent. Looks like a jump occurs between time 17.063933 and time 17.347238 if I am reading the file correctly.

Ok, I'll try that. I was able to download serial port monitoring software and was able to capture a short session. Gene NG1H

If you have dedicated USB sound devices (like a cheap dongle) and you assign WSJT-X to them, you won't have Win10 Pro update problems UNLESS....you plug in or unplug a new USB device, in which case

IF you have more than 1 sound card and you leave one as the default and do not use the default card in any way for your radio usage AND you do not use the second card for anything but your radio usage

Hi Alan, are you using SmartSDR and DAX on MS Windows and somehow feeding audio from that to your Ubuntu system? If so can you explain how you do that please? 73 Bill G4WJS.

Hi Pete, have you disabled "Power options->Current plan->Advanced power options->Advanced settings->USB settings->USB selective suspend"? Also you mention "Display audio", are you using an HDMI

Hi I hate Windows 10. It keeps messing with my audio setup. I have a PC with Win10 Pro 64bit. I use WSJT-X (now v2.4.0) for FT8. I connect to my radio (various Icom, Yaesu) via an USB 'Audio

WSJT-X v2.4.0 (And previous from v2.2) 'goes to sleep' after being inactive for more than a few minutes. Radio (various Icom, Yaesu) goes to Tx but no audio input so no output. OS is Win10 64 bit

Short answer, shows the probability of reliability of signal data. There is a chart you can refer too, but is normal at the link in another post. Gary -- KT7AZ

Bill Thanks for the idea. Yes, I have shutdown / rebooted everything. Windows 10 WSJT-X decodes just fine, but, the Ubuntu WSJT-X will not decode the exact same decodes. So, I think this

Hi Alan, the first thing to check is that your receiver is set to a USB mode. Although the presence of signals on your screen capture at 14.074 MHz would seem to imply that is the case. Looks like