There will always be a frequency change, as the frequencies of the FT4 'areas' are different from the FT8 areas. As far as why its missing, have you tied doing a Frequency List reset?

Hi Jack, FT8 and FT4 use different transmit periods so are not compatible, they are used in different frequency sub-bands. The WSJT-X "Settings->Frequencies->Working Frequencies" table defines the

When switching from FT8 to FT4 (under the Mode pulldown), I get a different set of frequencies and there is no choice for 14.080. In fact there is no 20M choice at all. What am I doing wrong? Jack

Bill - Thanks for the input. The sound card has analog audio out (of course) but I don't know how much, if any amplification, it has. I modified my settings by decreasing the KX3 mic gain to 10, and

Hi Terry, you can diagnose which end the problem lies by using the test application message_aggregator that ships with WSJT-X. Run that with two instances of WSJT-X and use it to initiate QSOs to see

Apologies if this has been asked before. I have one copy open for my IC-9700 on VHF/UHF and the other for HF on my IC-7300. I use the call roster on GridTracker and when I double click on a station it

Bill, Yes - I knew about the release of WSJT-X V2.5.0-rc5 but as I'm not very good with computers thought that I'd leave it to much better beta testers first. I will continue to run the old Map65 on

Never thought about that after the latest update, I changed the power management to off, thanks!

Is it possible you (un)plugged a USB device, (dis)connected a Remote Desktop connection, (had Windows automatically and without warning) do a Windows Update, or something else? It might be useful to

Ryan Is there a memory leakage somewhere along the line. Keep an eye on the amount of memory WSJT-X is using. If it is slowly climbing up, sooner or later it will crash. How long depends on what

Over the past week or so, I have been receiving WSPR, after a while I check and WSJT-X closed. At first, I thought when my screensaver turned on it somehow caused the program to close. This morning I

I am considering purchasing one, partly for 6 m meteor scatter operation using MSK144. I saw in another topic that WB4OMG posted that his FTDX-101 (somewhat similar design) required the use of the 12

LotW accepts the ADIF as specified. LotW were part of the discussion as were most of the log developers. LotW are only interested in the fact that it was a DATA mode as that’s the category in

I fix it. Some how my sound settings got changed in the laptop. I do need more horsepower and it’s being prepared for me and will be ready next week.

cd %LOCALAPPDATA% ren WSJT-X WSJT-X.bak Start WSJT-X and it will be a new configuration. Or this will start a new config also. cd \WSJT\wsjtx\bin wsjtx -r test See if either of those solve your

Hi, Jim. I had a different set of issues getting WSJT-X to work on my Optiplex 5050 (Dell) desktop, and after wrestling with it on and off for a couple of weeks, I threw in the towel and bought an

I had this error message show today while monitoring ft4. Wsjt quit (2.4.0) but jtalert stayed running. A trip to task manager and telling jt9 to end task let me restart wsjt. Hope thats sheds

When I mentioned committee, that was a polite word for the blog collective. But it is obviously DX4WIN that is confusing you. How does DX4WIN display SSB contacts? Contact them about this matter.

Furthermore, on a reliable strong clean fade-free satellite link, there are far more suitable data modes than ones designed for weak signals and the HF environment with pre-formatted rubber

On 30/08/2021 19:18, Roger Shultz via groups.io wrote: Hi Roger, there is a possibility that the audio device settings in the MAP65 settings file (map65.ini) get out of sync