I’m not sure how to do that. Perhaps I should reboot the computer and see if that works.

Using FT8 and just changed band to 15 meters. Initiated a normal QSO and received a free text [TNX 2BND 73] at the end. Auto Seq responded with "2BND KM4RL 73". The DX Call Window was changed to

It can’t be clock at this stage - the input graph (bottom left) is not showing anything - no audio is reaching WSJT-X. Mark - check and double check the audio connections, the ‘Audio’ settings

Make sure the clock in the computer has an accuracy of +/-1 second or better. Probably should be using an external time reference. Bob, K4TAX

Still no luck receiving anything. It looks like it is transmitting but nothing received. I even turned off the transmit to just monitor and still nothing.

Ahhhh that’s brilliant!! I’ll try it in a few minutes. Thank you.

Dick, when reporting a rig control error please include the error message details. 73 Bill G4WJS.

Hello After running WSJT-X (v2.2.# I think) successfully for over 12-months, I installed the new v2.4.0 SW, It installed fine and seemed to be working as expected: 1- Decodes of FT8 users appeared on

Hi Pierre, to specify a port number in the WSJT-X "Settings->Radio->Network Server" field precede it with a ':' character, so in your case that is ":4575", without the quotation

I try to setup my station with Hermes Lite 2 and Quisk in order to operate FT8 with WSJTX. I have set Cable Output (VB-Virtual Audio Cable) for the External Digital Audio Input and Cable Input

Good Grief ! Now I've uninstalled all sound device drivers In Device Manage (verified void of drivers) and tried it without drivers (before restarting) same thing ..."Error in Sound Input" then

I think that’s backwards, the audio output of your computer (Sabrent ‘headphone’ jack) should go to the audio input of your radio (microphone). And vice versa. And you may need some padding to

On Aug 24, 2021, at 6:27 PM, Bill Somerville <g4wjs@...> wrote: Hi Mark, so no CAT interface, set "Preferences->Radio->Rig->None" and "Preferences->Radio->PTT Method->VOX". You will need to enable

Well it looks like I am transmitting CQ but there is no band activity showing. I’m on 7074.0 Digital with power 5 watts and antenna at 1.0 SWR. Should I be receiving something or is it just slow

I Will try........ to delete my internal sound card. However I plugged in a spare USB module and got same error. Even further .......... I purchased a new USB sound device.... and cables.... got same

YEAH!!!! It appears to be working!!! Let’s see if I get a ‘QSO! Awesome and thank you so much!

Hi Dick, it would seem that HDSDR does not support the modulation mode WSJT-X is trying to set, try the other "Settings->Radio->Mode" option, or if that doesn't work try

Hi Mark, so no CAT interface, set "Preferences->Radio->Rig->None" and "Preferences->Radio->PTT Method->VOX". You will need to enable VOX on your rig if it has that

Hi Bill and thank you for your quick reply. I have a MacBook Air M1 running OS Big Sur 11.5.2. Connected to one of the two USB C ports is a Sabrent USB C Exterior Stereo Sound Adapter for Windows

Hello Bill OK, here is a screen shot of the message ===> and here are the details ===> Thanks Dick/w7wkr