I'm using time sync, works properly in the system try. Sorry for first reply w/o name and/or explain. Pietro I2OIM

Hello again Joe....You have my most sincere apologies.  I have been setting up various configurations within v2.4.0 and trying to remember to use them, but I often just click on Mode and change to

Thanks to all. I know that in Italy, at "packet era", many people let the radio running unmanned, and I can't find anything that allow it, but nothing that forbits it... So, in my plan there is a WSPR

I am trying to operate WSJTX with SDRAngel and a LimeSDR as the transciever. At this time I intended to run unattended as a WSPR beacon. The host system is a Pi4b with PU2SPY's PiSDR Build 4.2

Dan, thanks for the endorsement to Martin's suggestion on the Revo Uninstaller. I guess I have been in the "hole in the ground" on this one. Jim/KC4HW - EM71 Alabama

Net time Install it, runs as a service & starts when the computer boots up. Very dependable. Best regards, Kevin Potter k5vp

For Windows, I'd recommend Meinberg https://www.satsignal.eu/ntp/setup.html 73 Stan KM4HQE

I am using Dimenstion v 5. Still no luck. Anyone have any suggestions ? -- Thanks 73's de NU4N/Dave

So far working FT8 etc is totally useless . Dimension does't work always off over 1 second or so. Any help is appreciated. -- Thanks 73's de NU4N/Dave

The red bar on the left means you are sending to much volume into WSJT-x, adjust the microphone setting in the audio contols With little / no signals it should be below 40, normal operating it

I do not know what I did except I reset the audio to Microsoft default KD9DOG

Marshall -- As described in the WSJT-X 2.4.0 User Guide here https://physics.princeton.edu/pulsar/k1jt/wsjtx-doc/wsjtx-main-2.4.0.html#CONTEST_MSGS "The FT4, FT8, and MSK144 protocols support

Hey Martin, you a good resource of tips! Thanks I will give this a try. Jim/KC4HW

Let me add my vote to Martin’s on the Revo Uninstaller. It’s really quite good and should get rid of all of the remnants of whatever it uninstalls. __________ Dan – K4SHQ CFI/II

Hi again Jim, glad to hear that the GM8ARV information helped you to set up Meinberg on the laptop. Re: your problem on the Win8.1 PC, it might be worth running the Revo Uninstaller utility app and

Dave, I think that Bill mentioned some time ago that some file in that directory are installation and PC dependent. Only files wsjt-x.ini and wsjtx_log.adi are really needed to recover the same

copy all the files in the appdata wsjt folder to a thumbdrive, then paste on the new computer into the same appdata folder Dave Garber VE3WEJ / VE3IE

Bit of a pointless exercise really, but just to prove it could be done and tick the box. Here's WSPR transmitted via QO-100 Its a bit boring transmitting to myself, even if both callsigns are used

Sorry I hit the wrong click I have no raspberry pi Jim KD9DOG

Hi Marshall, I am in the same position and know exactly as much as you do. In current situation safest for you could be the use of different Configurations for FT8/FT4 and JT65. If I remember