No. 40, 30 and 20 meters FT8 are all pretty packed with signals. 73 Stan KM4HQE

Is the bands dead right now? I hear the squeals but my waterfall shows no signals also the rx side is showing nothing Jim KD9DOG

Team: Appreciate al the feedback. I was able to resolve the issue by installing the RT-Systems USB-64 - RS-232 to USB cable. However: with very little setup instructions(that I have found) I will be

Nope you are all good, I can see on PSKReporter you are getting out Goto Display Reception Reports (pskreporter.info) I have preset the report for you on the link 73 Peter M0PWX Sent

Hi, I have PSK checked in the settings, is there something else I need to do? Jim KD9DOG

ALC adjustments vary by rig model. Most rigs can get 90-95% of full power with no ALC showing. Some rigs need (expect) some ALC action before getting to 90-95%. Some rigs can get to 100%. So you need

I agree, you dont want ALC shaping And limiting audio for digital comms as this can distort the pure sine waves output by the software From what I see adjusting the PWR slider in WSJT-x, computer

Everything I’ve read said that you really don’t want any ALC at all. From your photograph I think it’s way too high and you need to bring that slider down to limit ALC.

You are getting out Sent from Mail for Windows 10 From: wisconsinjimmy Sent: 29 July 2021 19:38 To: main@WSJTX.groups.io Subject: [WSJTX] How do I know if my message is being sent out?

As has been written here and elsewhere repeatedly, the WSJT-X modes all use constant-envelope waveforms. YES, you can use a Class C amplifier. YES, there are good meteor showers in August. But with

Have you setup your callsign and locator in WSJT-x? In WSJT-x goto File > Settings Make sure your call and locator are in the General Tab “enable PSK reporter Spotting” sends

>The program is now crashing when i tune or enable tx. Is there a way to look at the crashlog? Hi Gregg, Normal answer to that indication is RFI. Solution is effective grounding or connection of all

Thank you! The program is now crashing when i tune or enable tx. Is there a way to look at the crashlog?

Hi Lee, You need two issues, means to detect the unwanted continuous transmission and secondly means to kill that transmission. The first you need to solve youself. For the latter you need some

Lee, great question. When I operate WSPR in transmit mode on HF, my reading of FCC Part 97 indicates that unattended operations are not in compliance with USA regs. Receive only operations 24x7 are

FST4 goes very nicely through my Class D 137kHz PA http://g4jnt.com/137tx.pdf and 400W class E for 475kHz http://g4jnt.com/QRO_500kHz_PA_Breadboard.pdf As does WSPR, and JT9 We don't use FT8 ion those

On 30/07/2021 1:47 am, ny2ny wrote: Whole decode line coloring is coming from within WSJT-X. Partial coloring, eg callsigns & grids, indicates that JTAlert is the source.

On 30/07/2021 5:18 am, wisconsinjimmy wrote: HamSpots shows you being spotted on 20m FT4. But no spots from you, indicating that you're not sending spots to PSKReporter.

Bill Thanks for deciphering me WSPER HamSpot and PSK that is what I was trying to say. Jim KD9DOG

I'm not sure the search is giving me all the answers and threads. A few months back I decided to update WSJT-X after a year on an earlier version... and whatever version that was I upgraded to (i