FST4 goes very nicely through my Class D 137kHz PA http://g4jnt.com/137tx.pdf and 400W class E for 475kHz http://g4jnt.com/QRO_500kHz_PA_Breadboard.pdf As does WSPR, and JT9 We don't use FT8 ion those

Whole decode line coloring is coming from within WSJT-X. Partial coloring, eg callsigns & grids, indicates that JTAlert is the source. de Laurie VK3AMA

HamSpots shows you being spotted on 20m FT4. But no spots from you, indicating that you're not sending spots to PSKReporter. de Laurie VK3AMA

Bill Thanks for deciphering me WSPER HamSpot and PSK that is what I was trying to say. Jim KD9DOG

I'm not sure the search is giving me all the answers and threads. A few months back I decided to update WSJT-X after a year on an earlier version... and whatever version that was I upgraded to (i

My meter shows 10 Watts and I can here the signal on the moni and looking at WSPER, PSK and Ham spot I see no indication if I have any output. Jim KD9dog #WSPR

Hello Joe, I have it transmitting to the antenna now but have not received any response as of yet, I am not sure what I did but I was sent to a web site that helped me get the 991A set correctly and

The relative strengths of the two mixes shows up when you plot their data on the same graph. It leads to the same false interpretation of antenna vertical plots that results from normalizing them so

Ok, still new user here with a general question that I was asked and wasnt sure of the answer. The question was "if there is intent for the hardware to remain powered up 24x7 (or even remote

Calls are being highlighted in the band activity pane with different colors even though i have only selected colors for MY CALL and CQ. All others are deselected. ?? Hi jay, Do have JTAlert

Output from the rig is a balance between the PWR slider in WSJT-x The windows speaker volume And the digital gain (DT gain) on the FT-991a I normally set the DT Gain by

Hello Frank, Got the darn thing working it now shows on my watt meter 10 watts when it goes into transmit, Only thing now is to find out if it is actually send a message. I know there is wsper and PSK

Thanks everyone, JS8Call seems to be the solution for what I was looking for.

Calls are being highlighted in the band activity pane with different colors even though i have only selected colors for MY CALL and CQ. All others are deselected. ?? -- jay ny2ny

Why don't a couple of you try it and see? -- 73, de W8AF ~ Anthony

In my application, I am working 2M meteor scatter. I find that power and antenna gain are both needed. I just happen to have a solid-state Class C commercial amplifier capable of about 500 watts

The Pi is connected to the 991A by a USB cable only. I would try to avoid using the USB 3.0 connections for this. I've noticed that they are a bit finicky. Also you might want to ensure that you

You could also try using a VPN, you will have a different ip address. 73, Bob KM4RL

Agree, try JS8CALL. And take a look at this YouTube channel: https://www.youtube.com/c/oh8stn Julian shows JS8CALL in action. Unfortunately, I haven't had time to get into it myself. 73 de

Jim The specifications I see for FairRite 31 is that it loses its effectiveness above about 10MHz. I don't understand how you justify only using 31 above this frequency? 73 Roger G#4HZA