Hi, I quiet often use the "TX Next" option to force a TX while a plane is in a good spot. Sometimes the next block has a TX by the auto TX algorithm. Is it possible to have the auto TX algorithm

Hi, I've noticed my remote site doesn't transmit as often as I would expect. I don't see this issue with my QTH setup - W10 IC9700 V2.4.0 TX PCT 20% Any suggestions on how to troubleshoot? Remote

Just an idea as an "option" somewhere, as I know not everyone will want this: When changing bands, clear the spectrum display. Yes, I know I can do that by clicking the "controls" box, but then that

It is always a bad idea to accept statements with no trustworthy attribution. 73, Jim K9YC

Google with no author what is best toroid core mix for hf

I wrote that 14 years ago. I've learned a lot since then, and the tutorial that included it has been updated at least a half dozen times to reflect that. Always get my writing directly from MY

Mixes 31 and 43 are best for HF use (31 is better for the low bands, with mix 43 having a slight advantage from 14 to 30 MHz).

ONLY mix 31. 73, Jim K9YC

Hi Willie The easiest way to get the SDR going with WSJT-X without disturbing any existing program instances dedicated to other radios is to follow the instructions in the WSJT-X manual regarding

Lee, JS8call will probably have much of the capability you are looking for. 73 de Bob K4RCG

OK, using Tor Browser worked just fine. Thank you very much for the tip!!! 73, Reid K8JLW

Ken You said in your previous post that /dev/ttyUSB0 is no longer available. I don't understand the jump from this statement to the problem is with 2.4.0 How have you come to this

Ok corrected. Mix 31 and 43.

I welcome my 200 watts of RF out to punch through poor 6m conditions. That's when brute power is needed. Otherwise on HF I am amazed at QRP stations.

Thats fine on using cat for years. But on what device

Hi Lee, Attempted to send you an offline reply but failed. You may want to look at the capabilities/functionality of JS8CALL. 73, Sam W2JDB

Karl My strategy with JT65 and FT8 in the last 5 years was to listen on the default frequency on each band and QSO all DX stations that cam in. This simple strategy did give me DXCC 250, 8 band

I am an older HAM (VHF/UHF) but relatively new to HF and digital. I just started learning the capabilities of WSJT-X in the last two months. It works on my IC-7300 and I have exercised WHISPER mode on

Time and frequency are the inverse of each other, and the two domains are simply "different ways of looking" at the same phenomena. Those of us working in pro audio in the last decades of the 20th

Why use a amp mostly low power 50watts and less