On 19/07/2021 22:05, Karl Beckman wrote: Karl, modes like FT8, FT4, MSK144, Q65, and FST4, which all share the same basic source encoding rules, have a great deal of

This has been well covered recently in this forum, almost to the point of becoming annoying. Please take note and pass the word to your ham friends. 1) FCC RULES PART 97 DOES NOT REQUIRE OR EVEN

Joe: I am completely agree with you! And in my unscientific means, it works well enough to keep your time for WSJT-X working. It may not be as accurate as a yottasecond (Ys or 10 to the 24th), but it

I have always been in awe over the signal processing and error correction techniques used in the assorted WSJT-x modes....and my curiosity compels me to ask... I wonder if any of these techniques

Yeah, sometimes there is a disconnect between the brain and the fingers... What it should have said is the propagation VELOCITY is about 250 meters per microsecond or 4 nanoseconds per meter. For

It's a simple text file (XML formatted), so notepad is good to edit. My suggest is to use notepad+ with XML plugin, It helps to show a friendly view. Pietro Pietro (mobile)

Hi Jim, "If one assumes the velocity factor of a USB cable is about 80%, that means about 250 microseconds of propagation delay per meter." Let's see... the speed of light is 3 x 10^8 m/s, so the

Thanks Jim. As I suspected, there was much I didn’t understand. One good point is that the new USB3 cable is much better quality than the old one. As part of my military service I was a

Which GPSDO did you settle on Jim? I have a BG9 clone and a Bodnar. The BG9 osc has drifted beyond where it can be corrected but I'm still using the NMEA for position only. Bob -

In my testing I have tried various combinations of multiple receivers and I do NOT recommend attaching more than one reference clock, i.e. a GPS, to a machine. NTP will work with more than one, but I

One enhancement that might help in this situation is to build a call queue that allows multiple callers to be stacked and worked either sequentially or from a pick list by the operator. The progress

Paul, you need to set up the audio input and output for WSJT-X in "Settings->Audio". If you are on Windows 10 then you may need to allow WSJT-X to use microphone devices in teh Camera and Microphone

I am using a Lenovo Core i3 10 Gen running HRD and WSJT-X to a Rigblaster Advanced and a KX3. It works perfectly with an old HP Laptop. However, using the same settings on my Lenovo Laptop the HRD

Yes, on W9MDB's recommendation I tried V. 2.5.0 and it fixed the problem. "Split Operation | Rig" works fine on K4 now. Thanks! /Rick N6XI -- -- Rick Tavan Truckee and Saratoga, CA

These are just text files so any text editor will work, notepad works fine. 73, Brad N8GLS Sent from my Samsung Galaxy S10 "not so" Smartphone

Bill, I tried that previously, but because of the use I make of these fields in the status UDP, I want them cleared after logging. I use them to display current contact location in DxAtlas. I'll try

I have not tried to edit an .ADI file, can someone tell me what additional software to use to edit one ? Thanks again, Bob W5XC

Well, the solution by Reino is more elegant.. you won't loose the qso, but only restore the grid as unworked. 73 I2OIM Pietro (via Tablet)

Bob, look at that call in the wsjtx_log.adi file and delete it. Pietro I2OIM Hi, There are two more sensible or logical solutions as well. If the actual grid is known, replace the current by it,

Thanks to all who have responded. It looks like WSJT-X ver 2.5.0-rc3 has solved the problem. I appreciate your help in resolving this issue. Steve AG2J Frankford Radio Club