No, Neither Yaesu nor any other manufacturer to my knowledge use separate PTT inputs to select audio source. Yaesu and recent Icom rigs use a dedicated "audio-data" mode (PKT-U/PKT-U,

Karl, I have it my version of WSJT-X. Lloyd K8DIO

Hi to All, I just made my first JT65 QSO ..... And found out that there is no AutoSeq CheckBox ..... I find this chechBox very useful, is there a reason, why this is not in JT65 ??? Tu, 73, Karl

The Microsoft Surface X uses an ARM processor. The link below may be of help in understanding app and drivers compatibility: https://docs.microsoft.com/en-us/surface/surface-pro-arm-app-performance I

hi, FYI applications run differently on ARM-based Windows 10 PCs such as Surface Pro X. Limitations include the following: Drivers for hardware, games and apps will only work if they're designed for

Edward, perhaps you are trying to install the 64-bit version of WSJT-X on a PC that has a 32-bit version of Windows installed, that won't work and you would need the 32-bit

On Sun, Jul 11, 2021 at 1:08 PM Bill Somerville <g4wjs@...> wrote: On 11/07/2021 19:05, Edward Goto wrote: Sirs:

Why do you need to send /8? FCC Rules have not required it for 50 years. The grid you send tells callers where to point their antennas with far better precision than /8. I've lived in W6 for 15 years,

Edward, "will not run" is not enough information to help with your query. Is there an error message you can share with us, including any details? 73 Bill G4WJS.

Sirs: WSJT-X 2.4.0 will not run on my Microsoft Surface Pro X tablet. I have seen YouTube videos where operators have seemingly run full rig-control suites on similar tablets, apparently using

Ken, you are not following the instructions in the Quick Start Guide, in the Installation section it states that you must set the "Start in" directory to the one when the

Glen, the part of the WSJT-X User Guide section 7.5 you refer to is only relevant to the 75-bit payload modes JT4, JT9, and JT65. For the 77-bit payload modes like FT8, FT4, MSK144, FST4, and Q65 the

Hi Bill, I forgot to send a picture of my MAP65 Shortcut. See below. Do I need to add -rig-name=K3_VHF to the MAP65 Shortcut ? I did not use the instance for the old MAP65

GM Bill, My old MAP65 program is in C:\WSJT\MAP65 WSJT-X 2.50rc3 is in C:\WSJT\wsjtx Instances: I see 3 folders. 1) C:\Users\Ken\AppData\Local\WSJT-X 2) C:\Users\Ken\AppData\Local\WSJT-X -K3_HF 3)

I am operating /8 and when calling CQ with the designator "/8" my Grid Locator is never sent in a CQ. I had added the "/8" to my callsign on the General tab. Section 7.5 of the online manual shows an

Mike: Setting the audio level to give a 30dB reading on band noise is fine if you can be absolutely certain that, with AGC off, the audio output level from the Rx will follow the RF input level in a

hi all, I want to report a bug .. I think its a bug .... So what happens ... I switch through the bands and modes ... from FT8 to FT4 and back. Most the times I'm using FT8, but on 20m also

Hi Ken, that error is probably because you are not running MAP65 from the right working directory. You mentioned you had modified your shortcuts before, please check you have

Yep, which is why I settled on it a few years ago. Like I said, my uses of FT8 are weak signal work on 160 and 6M. When you're trying to work EU from NorCal on 160, you're running legal limit, and so

I suppose if you have neighbors causing that kind of front end loading you have no choice. I've never seen such a thing here or on any of the hundreds of people I've helped. That would seem the time