Fred, At this point, the only suggestion I can make is to try the USB cable I recommended previously. Otherwise, I’m out of suggestions. Thanks, Joel, W4JBB

This has been discussed so many times before, but I’ll add my twopennorth. If I receive a repeated R+sig, I’ll repeat the RR73, if I don’t I’ll assume they’ve received it. It doesn’t

Hi All, Has anyone had version 2.4 lock up when trying to go into settings? I wish to edit frequencies and WSJT-x locks up when entering settings Brian G0VAX

I apologize if this topic has been covered before, I looked through the archives and couldn't find anything that seemed to be discussing exactly this topic. For the past 3 years I have been running

Just because you sent RR73 does not mean that the other station rcvd RR73. I still have that nagging feeling that the qso is not complete. So I like to see the 73 as an assurance that all was

Hi Joel, tnx fer the dog park info which leads me back to my initial problem post (#25962) in that having the IC-7300 which has a SiLab USB to UART device that I need the SiLab CP210X driver. So I

I' sorry: yes, I intend 2.3.x, I had downloaded the 2.3.1 and all is OK. yes, I tried without the flag about the freq. changes during transmit, but nothing changed. Pietro I2OIM

if you sent the rr73, what is the need to send 73 of any kind again.... I have never sent 73, after the rr73. just thought it was normal Dave Garber VE3WEJ / VE3IE

hello! There is a bug in WSJT-X v2.3.1 or later. When "TU NEWBAND 73" is set to Tx5 immediately after the start of QSO, QSO ends without sending the message of Tx5 at the end, and the dialog for

Hi Dennis, Have you checked that your rig is actually using COM1 as port number? I don’t remember, whether you told us which rig you are using and how it is connected to your computer for the

Finally got a screenshot of what happens when I try to Tune in WSJTX. Maybe it will help.. Dennis N6NG

Other countries will have interference on other 2m frequencies. Moving the default frequency is more than likely to cause problems elsewhere. Surely a more sensible course of action is to force your

Anyone know where I can find if we're supposed to use special frequencies for FT8 on Field Day? I've only been able to find references to 2019 Field Day frequencies for FT8

What we are trying to tell you is there are no 2.9.x releases. The current GA release is 2.4.0. Do you mean 2.3.0 ? OH2GGC gave you a complete list of releases. Did you even try what G4WJS suggested

What’s causing it Amos? It’s definitely a modulated carrier on 144.175 – looking like some form of FM. Is 144-146 an amateur-only allocation in Israel? Though all countries’ military ignore

I think 144.174 is pretty well cast in concrete. Here in the United States, we can only work CW, below 144.100. We work Q65 terrestrial, on 144.170. MSK144, on 144.150 and surrounding frequencies.

Thanks for the info, Dave. The numbers and settings look similar, but I'll have to look at them in detail. I was able to get my FT991A/Linux/FLDIGI/WSJTX system to work. I simply copied the various

We have a non stop interference on the 2m FT8 allocated frequency of 144.174 Mhz. See below. It can spread to Europe and America by TROPO and Sporadic-E and interfere with your best DX chances on

Hello Bill, It's a Kubuntu thing. I installed DragonOS today which is Lubuntu 20.04 and WSJT-X worked fine. When I switched from Lubuntu to Kubuntu with tasksel it slowed down WSJT-X. I

The point being that the documentation should be correct when pertaining to rigs being referred to. Neil, KN3ILZ