With v 2.4.0 when the watchdog jumps up my FT817 continues to transmit and an error appear in the frequency window Furthermore after a few minutes without any tx the frequency window become red with

I am operating a TransAtlantic VHF SDR Beacon Monitoring station here in St.John's NL GN37. The callsign for this 2M receive only station is VO1FN. Since inception in May there has been one decode of

Compiled WSJT-X from the latest source code on a Kubuntu 20.04 machine, connected to my (for me new) TS-2000. Everything works, except for the delay when e.g. double clicking a call in the band

I have not run WSJT X in about 1 month. I fired up my IC 7300 and ran WSJT X....everything seems to be looking like its working...I see signals on waterfall....the level meter showing about 60%. But I

Hi Joe, I also noted that Q65 behaves differently than the other modes in the 77-bit family. Q65 leaves out my call e.g. in message “WB7LYJ/R OH3MA 73”, when it automatically generates that

I followed all the instructions received and now it is working without power output interruptions. Thank you to everybody. 73, Yvon AE7YD Monday, June 21, 2021, 5:20:43 PM, you wrote: I've also seen

Hi Chris, thanks for those .WAV files. I was under the impression that you had more information about which ones failed to decode certaon messages. If you do have a list of messages not decoded for

Hi Joe I also managed to invoke this "defect" last night on FT8 using V2.4.0 I manually changed TX5 to say "KV4BV JO02 73" but the actual transmitted message was "KV4BV JO02 60" as seen on my own

Thanks for the prompt review and response, Joe. WSJT-X just keeps getting better! 73, Jim @ K5ND

Hi Jim, Thanks for the additional information. I can confirm this is a defect. It will be fixed in the next release. -- 73, Joe, K1JT

As a point of interest, what is the difference between /R and /M? 73 Phil GM3ZZA Sent from Mail for Windows 10

Doug, Tis a simple task to increase the RX bandwidth. Be in USB-D1 or D2 or D3 mode Press and hold the FILTER button Tap the desired filter button, FIL1 or FIL2 or FIL3 Tap the BW button Rotate the

Hello Bill I will try it via WETRANSFER so I see when it has been downloaded by you. The Link will stay on for about a week and you can forward it to others who are interested for testing. Think your

I've also seen WSJT-X stop producing TX audio on 2.4.0. I have the USB sleep turned off, which did help. It's an odd issue because my particular PC (Win10, up to date) has no physical connection to

Hi Joe, Attached is the screen shot from the original QSO. After the first three "60" messages, I used free text to send the other messages. Now when I type in WB8LYJ/R and press "generate std msgs"

Hi Jim, Have you done anything to try to reproduce this issue? I have not been able to reproduce it here. "WB8LYJ/R K5ND 73" is a perfectly legitimate message, and as far as I can see it is

Ok. The other possibility on my error was a backup was being executed at the time the append operation happened and causing the error about the file being in use. Starting a new file speeded up the

When my ALL.TXT exceeds 100M I usually split it up, but only to make searching easier. I've had it at least to 279M without problems, so it's likely you corrupted something than the file got too

I was getting this error as well. I found my ALL.txt file was 68 MB so I renamed it and let WSJT-X create a new ALL.txt file. Since doing that I haven't had any more errors.

Thank you Bill, this makes sense and I'll try it. I'll report later if it did solve the problem. 73, Yvon AE7YD Monday, June 21, 2021, 3:02:54 AM, you wrote: -- Best regards, AE7YD