Jon, both of those CPUs support AVX, so there was no need to

Dave, it would help if you and others did the small extra step of actually checking if your CPU supports AVX rather than leaving it to me to check. Your CPU does support AVX:

On 10/06/2021 11:44, Jeremy Stark via groups.io wrote: Hi Jeremy, don't assume your CPU supports AVX, many early Core branded models do not. See this post for how to check on

The number of messages seem to have skyrocketed recently and the proportion needing to be rejected has risen even more. The moderators do not have an indefinite amount of time to devote to

Strangely, for at least the last 3 weeks, I've been unable to find FT8 activity (or any activity for that matter) on 7.071 or 7.074. I have tuned there during both day and

Hi Jay,

a) intel core i7-4700MQ cpu @2.4 b) amd a10-5745M apu @2.1 73. Jon . g0myw

Thank you as well! VA7WWV

Many thanks! 73 - VA7WWV

Strangely I have heard no FT8 activity at all on 7.071 or 7.074 for at least 2 weeks. The problem isn't with either of my two transceivers--40 meters is otherwise alive and active on them but on

Thanks for the clarification, Bill and Reino. Is the Q65 ramp amplitude shape and timing documented somewhere? I couldn't find it in the User Guide or the Quick Start Guide. Does it vary with

If I recall correctly, the monitor jack on the SignaLink-USB is receive audio rather than transmit audio.

I used a TS-570D and a Signalink USB successfully back a few years. If you don’t hear the Signalink audio in the TS-570D sidetone monitor then something isn’t hooked up right or the Signalink is

Bill, Intel i7-4790 running at 3.6 GHz Dave KC3AM On 06/08/2021 19:37, Bill Somerville wrote: -- 73, Dave KC3AM Hams should be seen as well

Is the SL connected to the mic/headphone jacks of the Kenwood transceiver or the ACC2 (DIN13) jack? Kenwood use the PTT input (PKS) on the ACC2 jack to select audio source (input). If PKS is used,

hi - cant use 2.5.0 RC1 - loads ok, then get "subprocess error" which crashes the program. Reloading ok, then few seconds later same error . Back to 2.4..Win 7 here. -- jay ny2ny

Bill, thanks for the proposal to try "Fake it". My friend tells me that is what he has used for a long time. I have now asked him to try "Rig" and "None" and will report back when I hear from him.

is this different from line separation option already in wsjt? Dave Garber VE3WEJ / VE3IE

Thanks Dan i am working remotely, so I would not have seen this. -- Steve M0NMA

Hi Julian, we have had no other reports of truncated WSJT-X ADIF log files, also there is nothing in WSJT-X that could do that other than the menu option to clear the ADIF log file, could you have