My interest centers around starting wsjt-x with the --rig-name option. I am primarily interested in those settings which affect the rig configuration during startup and any nuances or subtleties in

Hello all, I run wsjtx on a raspberry pi and recently had a bad SD card leading to lost data. I ended up rebuilding everything but lost my log files of QSOs. I log everything automatically into

That is almost my exact configuration. Each "machine" has to have a static IP. On Linux you will want to build and install samplicator to split the UDP traffic among two different IP's and

Hi Ken, other than generally being the standard .INI format used widely on MS WIndows, the value formats are internal and should not be of interest since they are all readable and in most cases

Where do I find the documentation for the format of the rig specific .ini file (like WSJT-X - xxx.ini)? I looked through the User Guide but it was not coming to me. If possible, please point me to the

If a meter is properly calibrated (few are), six db is one S unit. Three db is double the power. Gary - AG0N

Yes the call-b4 is in red one the windows 7 but on the Windows 10 it shows in green but no B-4 If it wasnt for JTALERT I would not know if I had worked the station B4. -- Thanks 73's de NU4N/Dave

I run WSJT-X in Linux connected to DXLab on a Windoze box to do my needs highlighting in WSJT-X. It works well. I've tried JTalert a couple of times over the years but this has not been supported.

Hi Jim, as far as I know there is no issue with interoperation with DX Lab Suite across the Internet, specifically with SpotCollector, all you should need to do is open the server port in your

Since wsjt-x communicates with jtalert and dxlab via udp, is it supported configuration to run wsjt-x on a linux machine communicating with jtalert and dxlab running on a windows machine? This would

The update came out and was announced here on 5/24/21. Look for 2.4.0 GA. Gary - AG0N

Thanks Roger, I had previously tried both.Lowered RF Power to minimum on the 5000 which is 5 watts. Also had tried the dummy load. Just tried both again, no luck.

Bill, please don't alternate replies to the list with direct replies, I cannot answer your direct replies because AT&T block mail to you from my mail server. 73 Bill G4WJS.

And I didn’t know you could run a PW-1 and get auto band changing WITHOUT a CI-V cable to the radio. -- Don W6CZ/W6ZB DM07bk

Actually , I think an S unit is 6DB which means you must Quadruple it. Outlook Laptop Gil W0MN Hierro candente, batir de repente 44.08226N 92.51265W EN34rb

Sorry, wrong thread 73 de NØIGU Jon

Really, if you double your power you add 1 S-Unit. 73 de NØIGU Jon

Bill, I don't really understand your setup, you state "I do no use rig control and HRD is used for logging only." So is WSJT-X is not using CAT control I don;t see how it can be part of your

Bill, I just saw your note.The responses get lost sometimes in the voluminous email text. There is no CI-v connection to the PW-1. Just the one cable The Navigator is connected the the ACC on the

Bruce and Bill Thanks indeed for all suggestions. I downloaded Commander and had no problem getting it work with WSJT-X. However it seems that I still have the same problem so it probably my