Thanks Roger, I had previously tried both.Lowered RF Power to minimum on the 5000 which is 5 watts. Also had tried the dummy load. Just tried both again, no luck.

Bill, please don't alternate replies to the list with direct replies, I cannot answer your direct replies because AT&T block mail to you from my mail server. 73 Bill G4WJS.

And I didn’t know you could run a PW-1 and get auto band changing WITHOUT a CI-V cable to the radio. -- Don W6CZ/W6ZB DM07bk

Actually , I think an S unit is 6DB which means you must Quadruple it. Outlook Laptop Gil W0MN Hierro candente, batir de repente 44.08226N 92.51265W EN34rb

Sorry, wrong thread 73 de NØIGU Jon

Really, if you double your power you add 1 S-Unit. 73 de NØIGU Jon

Bill, I don't really understand your setup, you state "I do no use rig control and HRD is used for logging only." So is WSJT-X is not using CAT control I don;t see how it can be part of your

Bill, I just saw your note.The responses get lost sometimes in the voluminous email text. There is no CI-v connection to the PW-1. Just the one cable The Navigator is connected the the ACC on the

Bruce and Bill Thanks indeed for all suggestions. I downloaded Commander and had no problem getting it work with WSJT-X. However it seems that I still have the same problem so it probably my

also double check your USB cable to the radio, and confirm the radio is on. Dave Garber VE3WEJ / VE3IE

Bill, Try this and see if it helps locate the devices 1. Open sound settings 2. Open sound control panel 3. Right click on the white space in the sound control panel 4. Two boxes should appear - show

That sounds as if it might be RFI on the USB. Could you try doing the same test with either a dummy load or the power turned down to minimum or both and report back? 73 Roger GW4HZA

My WSJT-X had been working fine with my Yaesu FTdx-5000 for close to a year with hundreds of QSOs. I also use a SignaLink USB interface. I was using a version prior to ver 2.4 when my problems

Jim, Not the rig - the *COMPUTER SOUND CARD*. Mic inputs with "jack switching" are generally looking for the presence of an electret mic (which is the default for computers). 73, ... Joe,

The “USB Audio CODEC” devices are now gone from my device manager, and I can’t figure out how to get them back. I have tried uninstalling and reinstalling, and deleting, USB drivers several

Hamlib has been changed in the latest WSJTX release.... - On MS Windows WSJT-X now ships with a DLL version of the Hamlib library, specifically Hamlib version 4.2. This should allow Hamlib bug

Yes the call-b4 is in red one the windows 7 but on the Windows 10 it shows in green but no B-4 If it wasnt for JTALERT I would not know if I had worked the station B4. -- Thanks 73's de NU4N/Dave

Thanks Bill, No problem with my Kenwood, but several friends with Icoms are having hamlib problems. Just trying to help them. Bobby/N4AU

My laptop has the same single jack for both line in and line out. Use a splitter cable. One side accepts line in (to laptop's mike connection) transceiver's audio out, the other is the audio out or

Very interesting. The current draw requirement is news to me. The mic inputs of most rigs are also designed for dynamic mics. 73, Jim K9YC