Hi Dave, looking right now I see PSK Reporter showing your station is monitoring 0 Hz, that indicates no CAT control in WSJT-X, and no attempt to set the current operating frequency. Could that be

Hi Peter, check you CAT control settings. 73 Bill G4WJS.

OM, please refer to the WSJT-X User Guide: https://physics.princeton.edu/pulsar/k1jt/wsjtx-doc/wsjtx-main-2.4.0.html#BAND_SETTINGS 73 Bill G4WJS.

Howto fool wsjt to report another frequency on psk network? I have transverter and my radio Yaesu FT-818ND is CAT connected to computer and wsjt thinks i am on 28.154Mhz but i am really on 70.154Mhz I

Richard, rather than reporting you have "the famous log file error" please report the exact error message you get, including the details. 73 Bill G4WJS.

Hi Sam, Jim and Bill Thanks for the advice about my question. Jim thanks for the advice but your advice was different from the solution I was thinking of. I run multiple WSJTXs with one PC with

EUREKA !! Just installed the latest GA build and the issue seems to have been resolved !! Many Thanks to all that were instrumental in resolving this issue !! 73 Paul W4ARK

Bill, Happy to report that the issue that has been described above has been resolved with the latest GA distribution !! Many Thanks to all that worked to correct this anomaly and to those that

Using wsjt-x version 2.4.0, ft8 Any help would be appreciated. I have spent a couple of days making changes with no result. All has been working ok for months before last Windows update.

Checking to see if there is an anticipated update before the clock runs out on rc4. Thanks!

That looks like you are failing to connect via the USB cable - check that you have the right com port and baud rate. a bit more to work on would be appreciated as well! -- Steve M0NMA

Have you entered your antennas by band on the Station Information table on the Frequencies Tab in WSJT-X settings? 73, Jim K9YC

Quick fix ... buy a cheap $6 or $7 USB sound dongle for the laptop. It will have separate mic and speaker connections, and this then frees up the laptop's soundcard for normal computer

Most headphone/mic inputs are designed for electret mics and look for a 1 mA current draw of the electret mic to turn on. Try connecting a 2.2 K to 3.3 K resistor across the mic input of the computer

You do realize that you have given us no information about your rig, your OS, or anything else to give you any sort of advice, let alone your callsign and name. Neil, KN3ILZ

Hi Taka-san, hardware PTT sharing is working for me with WSJT-X v2.4.0, the hamlib_settings.json file to configure PTT sharing is no longer needed. The error message you are getting is indicating

If I remember correctly, this software is open source. There are thousands of users that are happy with it. Just re-write the code if you aren't happy with it. 73 de NØIGU Jon

Using wsjt-x version 2.4.0, ft8 Any help would be appreciated. I have spent a couple of days making changes with no result. All has been working ok for months before last Windows update.

Using wsjt-x version 2.4.0, ft8 Any help would be appreciated. I have spent a couple of days making changes with no result. All has been working ok for months before last Windows

THERE IS *NO* EXPLICIT B4 COLOR IN WSJTX. The only color on B4 is any residual color - are all your "decode highlighting" options the same (including the checked options)? Are you using an eternal