2013 Dell Latitude E6330 laptop Windows 10 Pro 2.7 ghz processor 8 GB ram x64 based processor (64 bit) This laptop has a dual audio jack that is mic/headphones and is the only way to get audio on and

I upgraded to 2.4.0 and I'm running Windows 10 Pro. I saw no change in the PWR slider for either TUNE or Operate. I do have Remember Tune and PWR settings checked in the F2 menu option. 73 Bob,

I'm a believer in KISS -- Keep It Simple, Stupid!:) If your radio supports VOX from the input you're using to send the digital signal, try that option. I've done nothing but VOX for SSB, RTTY, and

Lars, Try the rig in the dropdown for IC-7100e4-DATA It has for the DATA command this, [pmDIG_U] ; These lines select USB-D for USB digital mode,

On 28/05/2021 17:34, Lars Berg wrote: Hi Lars, Omni-Rig can only support a limited number of modes on your rig, there are insufficient to support FSK RTTY modes as well as

Hi Tim, which version of WSJT-X are you using? Does WSJT-X track your rig's frequency, and is WSJT-X able to set your rig's frequency? Have you disabled "CI-V Transceive Mode" on your

Bill, first off before I address your issues with WSJT-X v2.4.0, I hope you are not using a PW-1 connected to the same CI-V connection as a PC. 73 Bill G4WJS.

I second this. It may be best to make it a selectable option so it won't trip up some of our older ops that have grown to expect one behavior and get surprised with something unexpected.

Computer: Fujitsu Esprimo 2.90GHz Ram: 16Gb OS: W10 PRO 20H2 (Latest may update) Rig: IC-7100 (Power used abt 10 watts) App: WSJT-X Ver. 2.4.0 (Same problem on all versions tested ) Omni Rig 1 type:

Hi Tim, I have an IC7600 and it works fine using CAT PTT. RTS and DTR won't do anything unless you have the appropriate hardware connected. Have you tried transmitting on low power to check for RFI?

>I suggest that the TX4 option be a toggle of ALT-R instead of ALT-R and CTRL-R. Much easier to remember and use. Thanks for considering this change. 73, David AD4TJ Hi David, Just my counter

I don’t know what keystrokes you speak of. Just double click it and it will toggle between the two settings. No keys involved. Gary - AG0N

>BK MY ERROR ITS WORKED B4. Red on the windows 7 and green on WIndows 10.Why are the 2 different when both are set the same ?? Hi Dave, So in two computers the wb colors are different. What you

Another thing to suggest is to read the release notes for the latest Hamlib, since that's added between -rc4 and the final release.

Taka-san, I see you have the same serial port specified for CAT Control as well as PTT via RTS. Is that what you intend to do? Did it work like that before? I've never used such a configuration,

Hi David, The original request for the Alt+R and Ctrl+R was done for blind hams to be able to control that. The problem for using Alt+R only as a toggle is that a blind ham would not know the current

Stu, You're most welcome! Glad I could help. My research list now includes hooking up the real TS-2000 I have in the shack to see whether the latest version works properly with it. Might help

I am stumped. I can no longer get WSJT-X to transmit with my Icom 7600. I had the program setup and working, then didnt use for a year or so. Been trying now for a week to get going and no joy. I

Correction...not 14 years but since the beginning... Bill W2CQ

I have an Icom IC-7800/PW-1 and a Navigator. Latest version of Win 10. I have never had an issue with any versions over many years(14?). I downloaded 2.4. I used it for a while after the download and