If I remember correctly, this software is open source. There are thousands of users that are happy with it. Just re-write the code if you aren't happy with it. 73 de NØIGU Jon

Using wsjt-x version 2.4.0, ft8 Any help would be appreciated. I have spent a couple of days making changes with no result. All has been working ok for months before last Windows update.

Using wsjt-x version 2.4.0, ft8 Any help would be appreciated. I have spent a couple of days making changes with no result. All has been working ok for months before last Windows

THERE IS *NO* EXPLICIT B4 COLOR IN WSJTX. The only color on B4 is any residual color - are all your "decode highlighting" options the same (including the checked options)? Are you using an eternal

I noticed today that my antenna's are not showing up in PSK reporter. Any thoughts ? -- Thanks 73's de NU4N/Dave

Thank you. You may be on to something, I need to do some checking I cant do right now, but I will check SWR to ensure 2 to 1 or less as next steps!!!

2013 Dell Latitude E6330 laptop Windows 10 Pro 2.7 ghz processor 8 GB ram x64 based processor (64 bit) This laptop has a dual audio jack that is mic/headphones and is the only way to get audio on and

I upgraded to 2.4.0 and I'm running Windows 10 Pro. I saw no change in the PWR slider for either TUNE or Operate. I do have Remember Tune and PWR settings checked in the F2 menu option. 73 Bob,

I'm a believer in KISS -- Keep It Simple, Stupid!:) If your radio supports VOX from the input you're using to send the digital signal, try that option. I've done nothing but VOX for SSB, RTTY, and

Lars, Try the rig in the dropdown for IC-7100e4-DATA It has for the DATA command this, [pmDIG_U] ; These lines select USB-D for USB digital mode,

On 28/05/2021 17:34, Lars Berg wrote: Hi Lars, Omni-Rig can only support a limited number of modes on your rig, there are insufficient to support FSK RTTY modes as well as

Hi Tim, which version of WSJT-X are you using? Does WSJT-X track your rig's frequency, and is WSJT-X able to set your rig's frequency? Have you disabled "CI-V Transceive Mode" on your

Bill, first off before I address your issues with WSJT-X v2.4.0, I hope you are not using a PW-1 connected to the same CI-V connection as a PC. 73 Bill G4WJS.

I second this. It may be best to make it a selectable option so it won't trip up some of our older ops that have grown to expect one behavior and get surprised with something unexpected.

Computer: Fujitsu Esprimo 2.90GHz Ram: 16Gb OS: W10 PRO 20H2 (Latest may update) Rig: IC-7100 (Power used abt 10 watts) App: WSJT-X Ver. 2.4.0 (Same problem on all versions tested ) Omni Rig 1 type:

Hi Tim, I have an IC7600 and it works fine using CAT PTT. RTS and DTR won't do anything unless you have the appropriate hardware connected. Have you tried transmitting on low power to check for RFI?

>I suggest that the TX4 option be a toggle of ALT-R instead of ALT-R and CTRL-R. Much easier to remember and use. Thanks for considering this change. 73, David AD4TJ Hi David, Just my counter

I don’t know what keystrokes you speak of. Just double click it and it will toggle between the two settings. No keys involved. Gary - AG0N

>BK MY ERROR ITS WORKED B4. Red on the windows 7 and green on WIndows 10.Why are the 2 different when both are set the same ?? Hi Dave, So in two computers the wb colors are different. What you

Another thing to suggest is to read the release notes for the latest Hamlib, since that's added between -rc4 and the final release.