Check the width setting. FT891 have a very bad habit of not remembering the width setting. Verify if it is set to 3KHz, 891 like to go back to 500Hz setting. 73, Kit W3KIT

Hello, I am a college student and new to ham radio. For my senior project I decided to attempt EME/Moonbounce. I have an IC-9700 and a PC running Ubuntu 18.04 with WSJT-X v2.2.2. I am having trouble

I can set TX6 to say CQ MO-KS-LA AB8YZ EM12 but when it transmits is says <....> AB8YZ. JoAnn AB8YZ

Trying to install WSJT-X ver 2.3.1 on Ubuntu I am not very good with linux but trying. When I tried to install using sudo dpkg -i wsjtx_2.3.1_amd64.deb it comes back with an errors. Any help is

Hi All, "Highlighting a new country". Under General/Display I've checked the Show DXCC box and under Colours/Decode Highlighting I've checked the New DXCC on band box. With these settings, I expected

https://mcmw.abilitynet.org.uk/windows-10-slowing-down-double-click-speed-0

Hi David, You explained that behaviour completely, thanks! Well, there could be a lot of other minor issues WSJT-X could do better, but once your know what is happening you should just “obey”

That's great, many thanks Bill. 73, Richard, G4KRW

Hello Bill, Saturday, May 8, 2021, 6:10:10 AM, you wrote: ---------------------------------------------------- ---------------------------------------------------- Thanks Bill, and others, especially

Hello Bob, I see the same effect when I push the tune button before. In the windows sound window I see that sound output switches to the time when wsjt is in receive state and sound output stops when

The following is all about FT8 on the FT-891: When I run the Windows latest version of WSJT-X and configure it to talk directly to my FT-891 through a Signalink USB, it works great when the

Hi Reino, Thanks for responding. To answer your question... Yes, I can paste into Notepad just fine. I think I see the problem. Perhaps you can test this to see if you get the same behavior. If I

Thanks Bill, I doubled clicked the partner’s report and that doesn’t populate the DX Grid. I have a personal problem that I can’t always double-click fast enough. 73 Phil GM3ZZA Sent

Hi Richard, small numbers like that can be ignored, we had to set the cut off somewhere. Negative numbers indicate more samples than expected. The counts are for each period of the current mode,

Thirty seconds is the normal time for MSK144. Gary - AG0N

Have you selected the audio from your radio in the app. Also have you selected the TX audio to your radio? Have you setup PTT? These are the three items that you have to have setup for the App to work

Bob, more contextual information appreciated please? 73 Bill G4WJS.

Speaker set to Codex? Sent from my Samsung Galaxy , an AT&T LTE smartphone

Which radio is yours? Inviato da iPhone Bruno Peticone -- Bruno Peticone, IU0OAD

Hello, I would be grateful if someone could answer a couple of questions for me: Summary: 1. Am I right in believing that wsjtx_syslog.log started life when wsjt-x 2.3.0 was released? 2. Looking at