Try http://dxatlas.com/DxAtlas/ The rectangular projection map offers a grid square overlay and has a tool that allows you to mark each square as "worked" or "confirmed". + The freeware DXLab

Try http://dxatlas.com/DxAtlas/ The rectangular projection map offers a grid square overlay and has a tool that allows you to mark each square as "worked" or "confirmed". Mike K6ML

Hmmmm, if you want to cover the world and see even all of the grids at even a 4 digit level you are going to need a Really big OR AN ELECTRON MICROSCOPE. Outlook Laptop Gil W0MN Hierro candente,

Try http://dxatlas.com/DxAtlas/ The rectangular projection map offers a grid square overlay and has a tool that allows you to mark each square as "worked" or "confirmed".

Icom IC-7300 using USB cable. I upgraded to 2.3.1 from 2.3.0 and have been having random rig control loss on FT8. I do not think this is an RFI issue as I have been using the exact same setup with

DXMAPS.COM also gives you many kinds of maps with QTH locator squares Sent from Outlook Mobile From: main@WSJTX.groups.io <main@WSJTX.groups.io> on behalf of Dick Bingham <dick.bingham@...> Sent:

Dick, I use FFMA Grid Tracker and Map which can be found at: NZ3m.com. It's an Excel Spreadsheet with some nice features. 73, Stan KK3KK In a message dated 4/13/2021 1:01:57 PM Pacific

Update: after hours of work, I solved this. It turned out to be caused by a (very) badly behaving modem card! It actually permanently damaged the operating system, so just uninstalling and removing

Dick See” GridMapper by QRZ Ham Radio Amos 4X4MF

Good afternoon. I got my income 7300 and 9700 set up and working again but forgot to check output power, which turns out to be zip. I went ahead and worked on the icom res-ba1 software and got that

I'm looking for a decent map or maps showing Grid Squares that can be purchased or downloaded from the web. Logging all of those FT8 grids WSJT-X provides on a good map would be nice. So far, I have

Hi Jim, What if that table is just compiled from manufacturers datasheets and net pages? 73, Reino OH3mA

My stn is showing on 40 but not the antenna I have set in the freq. tab It's just showing my location and LOTW sign on psk reporter. Any thoughts wud be appreciated. -- Thanks 73's de NU4N/Dave

Have you tried running at a lower RF output power to see if it does the same thing? Or run full power with a dummy load attached. That way you could make sure it's not related to stray RF coming

v2.3.1 (GA) Dark Mode anomaly When STD messages are populated with a callsign (from Dx Call window) and you switch modes from FT8 to MSK144, the Tx5 field generated changes to light blue with white

Hi everybody, I am now QRV on MS-50.280 for at least 2 Months, I am well in working normal QSO. Now, in a few days; the Lyrides meteor shower is voming up. Please tell how to operate this issue and

I have. And it frequently locks up (spinning beachball) when I try. What has worked is the following sequence: 1. quit WSJT-X 2. change radios in logging software (MacLoggerDX) 3. launch WSJT-X 4.

On 13/04/2021 12:28, Panther 353PA wrote: OM, so I can see what is happening put the attached file into your WSJT-X configuration files directory (~/.config/), restart WSJT-X,

On 13/04/2021 11:30, petko.marek@... wrote: Hi Marek, what do the following commands print? pactl list short sourcespactl list short sinks 73 Bill G4WJS.

I entered and submitted my log. I received no acknowledgement. I could find no results from past contests on the web site. There is a link to archives but the only material I found there was