If you are using WSJTX, JTAlert *and* DXKeeper, you will need to do it this way as JTAlert will use your DXKeeper log for "B4" and not the WSJTX file. The adif file is only used when JTAlert is not

None of these are contesting applications. N1MM Plus Logger is contesting software, and integrates with WSJT-X. WriteLog is also contesting software, and it MAY integrate with WSJT-X. N1MM Logger Plus

Looking for input....when I'm trying to run a CQ my Tx/Rx frequency changes to the frequency of the last contact that I made. I pick a spot in the waterfall and double click ctrl, the red/green

Hi Andy, Yes, the mp_* routines are there to do slow-but sure multiple-precision arithmetic. This is necessary because we need to save a 71-bit result of the packing operation. I just wrote a simple

Another way of doing it is that since you using JTAlert, you can set the B4 date to disregard any QSOs prior to the date of the start of the contest. You would then also adjust the

Ah, thanks Bill. An endian detector - life must get very gets complicated if you need to cope with both. So I can ignore most of that and just calculate the base 42 number from scratch. 42 ^ 13 can

Hi All, As I have seen a few threads regarding adi files merge questions. I am just finishing an enhancement to my Alltext.exe program to facilitate appending ADIF records from one adi file to

Hi Andy, the routines pack ASCII character strings of a limited alphabet (the 42 characters in the variable c) into a base 42 number. mp_short_init is an Endian detector so that the

Hi Radi, Just use any text editor such as Notepad. You need to open using that text editor program as you got Adifmaster installed. Cut and paste or copy and paste as appropriate from one log file to

Hi Bill, Thanks for the response. My problem is not only the merging, but how to extract two QSO date blocks and to create two .adi logs, one containing QSOs from my Home locator JN08WT and another

Take a look around when that happens and see if the radio and/or the frequency indication in WSJT-X have changed. It sounds like you are shifting frequency on receive. I assume you are running CAT

Hi Pete, yes that is the recommend strategy. 73 Bill G4WJS.

Hi Carl, Thanks for the response. You said ADIF Master is not needed. But then which application to use to open the wsjt_log.adi , cut QSOs from certain date blocks and create two new .adi files, one

Help I'm tearing my hair out :-( Trying to understand the plain text encoding, the 'packtext77' routine in the 'packjt77' module. and getting totally flummoxed by the mp_short ops. Specifically

Contesting with WSJT-X, JTAlert, DXKeeper What is the best way to work contests with the above software? I want JTAlert's worked B4, WSJT-X's coloring, etc to be relevant to the contest only.

Hi Jim, what rig are you using, and how is it connected to you PC for CAT and PTT control? 73 Bill G4WJS.

I've encountered some problems since upgrading from 2.2 to 2.3.1: 1) When I click on the up arrow to change frequency on the waterfall, about 20% of the time on a seemingly random basis, I get an

Occasionally, a DX station will show up using FT-8 on a non-standard frequency, and the question then becomes "Is he using F/H mode or standard mode"? That situation popped up yesterday when EP2LSH

Thanks, Julian,G3YGF

Hi Julian, you have it correct. Dual messages are also used for compound callsigns, in that case the "Prefer Type 1 Messages" is not relevant. 73 Bill