main@WSJTX.groups.io

Hi Dave, GB3VHF & GB3UHF. 73 Bill G4WJS.

By Bill Somerville · #22534 ·

It suddenly occured to me that there was no gap between the time stamp and the frequency. I guess no one expected some idiot (me) to try it on 23cm. :-) I sorted that and now fmtave will run, but it

By David Ackrill · #22533 ·

#FreqCal Running fmtave #FreqCal

Hi all, I'm trying to get my head round the second part of the Frequency Calibration procedure. I have calculated a value for the 'slope' entry and now I want to calculate a value for

By David Ackrill · #22532 ·

Re: Help: Ubuntu 20.04 Audio settings for IC7300 and IC9700 #linux

Jim, here are sound setting for all three ham programs I am using ubuntustudio 20.04LTS OS and they all stay constant since I invoked the suppress auto USB device switching. Only glitch once

By Andy_501 <andrew.webb.501.ve4per@...> · #22531 ·

Re: #FT8 Can't get my FT-991A om 60M #FT8

On Sun, Feb 21, 2021 at 12:04 PM, Cliff Fox (KU4GW) wrote: That was also a pretty accurate description of the licensing question pool study manuals of today as compared to the ones of just 24 years

By Ken WB8UFC · #22530 ·

Re: 2.3.0 TX No Audio after Band Change #FT8 #AudioIssues

The Halt TX and enable works, but shouldnt have to do that. RDR

By Randy Reynard · #22529 ·

Re: 2.3.0 TX No Audio after Band Change #FT8 #AudioIssues

Hi Neil, It does it if I select Tune, transmits a carrier, de-select Tune, stops TX, on RX, say someone is calling CQ, klick on their callsign, WSJT poplates the various boxes, goes to TX at the right

By Derek Brown · #22528 ·

Re: 2.3.0 TX No Audio after Band Change #FT8 #AudioIssues

Try using 'Halt Tx' button rather than use the Tune button as a toggle. Neil, KN3ILZ On 2/22/2021 12:58 PM, Derek Brown via groups.io wrote:

By neil_zampella <neilz@...> · #22527 ·

Re: 2.3.0 TX No Audio after Band Change #FT8 #AudioIssues

Hi all, I had a similar problem on Ver 2.3 this afternoon using a IC-9700, if I hit Tune I get a tone out , if I then went enable tx and call CQ, radio would click over to TX, but no tone sent, no RF

By Derek Brown · #22526 ·

Re: Input audio Left and Right is the same #AudioIssues

Hi Henk, I use left and right stereo channels regularly with WSJT-X Rx audio, it works as intended as far as I can see. 73 Bill G4WJS.

By Bill Somerville · #22525 ·

Re: 2.3.0 TX No Audio after Band Change #FT8 #AudioIssues

Anan7000dle PowerSDR OpenHPSDR mRX PS v3.4.9 Band change by WSJT-X v 2.3.2 Reverted to 2.2.2 and the feature is gone. I also would get a report of my own station with 30db report

By Robert Lorenzini · #22524 ·

Re: Help: Ubuntu 20.04 Audio settings for IC7300 and IC9700 #linux

Hi Bill. Well it seems that helps a little, the first radio starts with the correct audio settings, however the second radio gets the same audio device as the first and when i

By Pa3gcu <pa3gcu@...> · #22523 ·

Input audio Left and Right is the same #AudioIssues

Hi, My radio is a K3s with USB audio and main and sub rx. I have two instances of WSJT on one PC, one using Left channel audio, the other Right channel audio. The WIN10 microphone is set for 2

By Henk PA0C · #22522 ·

Re: 2.3.0 TX No Audio after Band Change #FT8 #AudioIssues

All of this information has been provided in this topic. Here is what we've provided: Rigs impacted - that I'm aware of: IC-7300 FT-891 Elecraft K4 IC-9100 IC-7410 wsjt-x Version: 2.3.0 Settings

By Randy Reynard · #22521 ·

Re: 2.3.0 TX No Audio after Band Change #FT8 #AudioIssues

Hi Bob, Starts to be interesting. For records which rig, program version, Radio, General settings and perhaps how exactly band change is operated may be needed before this behavior can be repeated.

By Reino Talarmo · #22520 ·

Re: WSJT-X v2.4.0-rc1 FT4 Automated Transmissions #FT4 #IssueReport

Chris & Reino I did check this issue by simulation, see below, no problem was detected. Amos 4X4MF

By Amos Sobel 4X4MF · #22519 · Edited

Re: WSJT-X v2.4.0-rc1 FT4 Automated Transmissions #FT4 #IssueReport

>I have to disable TX manually select the next transmission, then re-enable TX. If I'm quick enough, I can select the next step before it starts transmitting. Chris, Do you mean that ”Now”

By Reino Talarmo · #22518 ·

WSJT-X v2.4.0-rc1 FT4 Automated Transmissions #FT4 #IssueReport

I have been using this program successfully on all modes using the Raspberry Pi Buster OS. Today, I decided I would switch over to FT4 since I saw some stations on there. I saw the first station

By Bedrock305 · #22517 ·

Re: Help: Ubuntu 20.04 Audio settings for IC7300 and IC9700 #linux

Hi Bill, Thank you very much for that link. That's exactly what I was looking for to modify the audio device names. I used the udev rule verbatim from that article and it

By John N9ZL <jbrooks@...> · #22516 ·

Re: Help: Ubuntu 20.04 Audio settings for IC7300 and IC9700 #linux

Hi John, Richard, and Stewart, have any of you tried something like the answer to this question:

By Bill Somerville · #22515 ·

Messages