HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HTTP Change the value of "start" to 4, which means disabled. Reboot PC All the troubleshooting steps to find a

I can confirm the OP's report. I have exactly the same problem with CAT keying. The rig keys up but no audio after band change tune or tx. Halt and tx restores mostly. Bob -

Hi Randy. I tested what happens with my FTdx3000 and could not repeat your non-TX after a band change at all. Transmission started (with audio) either by double-clicking or Enable Tx immediately

Hi Jim, This for sure is not just a mode to be used for scatter contacts! I expect this spring, we will see Q65 being used between Region 2 and ZL/VK on either 50.285 or 50.305, and I am sure this

The primary hangout that I'm aware of for coordinating NA VHF activity is the VHF-Slack group. An invitation is needed to join. If you are interested, I'll ask the group's admin to send you a link.

Answers to the questions - and / or comments: Do you Stop monitoring and Halt Tx before a band change? > No, I didn't need to stop monitoring in prior versions. I never change bands during a TX so

It looks like your software is set to decode wspr-2, not fst4w-120

Many Thanks... I have seen a post on a logbook forum on this topic of adding Q65 to logging option best 73 Dave

Alrighty then, 50.275 she is. -- 73 Bob KD7YZ -- -- Bob KD7YZ in NE Kentucky

Thanks Lance, I'll move there -- 73 Bob KD7YZ -- -- Bob KD7YZ in NE Kentucky

Still gelling, but 50.275 is the US freq and 50.305 is the Euro freq for Q65A. I've made a few contacts, including K1JT. GL & 73 Jim - N4ST

Hi Bob, You can coordinate 6m activity on the ON4KST REGION 2 CHAT PAGE: http://www.on4kst.info/chat/login.php?band=7 <http://www.on4kst.info/chat/login.php?band=7> You probably didn't get much

Hi I have been calling CQ on 50.313 the last couple days. Dunno if that is the correct spot. Also wonder is there a web-based BBS where MANY ops hang out who might notice if I relayed the fact I am

Ken, That was also a pretty accurate description of the licensing question pool study manuals of today as compared to the ones of just 24 years ago. I think they all need to require new hams

Boris, I never got wsjt-x to work on TX with rig control on my FT2000 when using the FT2000 transverter mode. As you say it faults on TX, I tried entering 44.xxx into wsjt-x but that didn, t work

Yes, for sure. 73 Corneliu

Thanks Kai ... I have the Signalink set to max... got chokes on just about everything . Power out is usually about 50w ..increasing/decreasing power does not change things. Cheers Dave,.G4OTU

Hi John and the group. I have the same problems here, i am not a linux wizard however the was things work rather calls for a wizard to solve the problems. Gone back the that ollie saying, Read The

It appears Win10 Pro's latest update has made a change to access to port 80 such that Wampache64 portion of the WAMP server bundle does not start. Thus without apache running phpmyadmin will not give