Ken, That was also a pretty accurate description of the licensing question pool study manuals of today as compared to the ones of just 24 years ago. I think they all need to require new hams

Boris, I never got wsjt-x to work on TX with rig control on my FT2000 when using the FT2000 transverter mode. As you say it faults on TX, I tried entering 44.xxx into wsjt-x but that didn, t work

Yes, for sure. 73 Corneliu

Thanks Kai ... I have the Signalink set to max... got chokes on just about everything . Power out is usually about 50w ..increasing/decreasing power does not change things. Cheers Dave,.G4OTU

Hi John and the group. I have the same problems here, i am not a linux wizard however the was things work rather calls for a wizard to solve the problems. Gone back the that ollie saying, Read The

It appears Win10 Pro's latest update has made a change to access to port 80 such that Wampache64 portion of the WAMP server bundle does not start. Thus without apache running phpmyadmin will not give

Thanks Randy, Some further questions inline. 73, Reino OH3mA >I only change during receive - it wouldn't make sense to do it in transmit. R: Fully agree, hi. Do you Stop monitoring and

I have created a short video for those with the new and amazing M1 Mac who want to use WSJTX. In the video i show how to use AppleScript to create an application that runs automatically at

Hi Richard, I run 3 radios at once, an IC-7600, an IC-7300 and an IC-9700 in 3 different instances of WSJT-X 2.4.0-rc1 with Linux Mint 20.1 (based on Ubuntu). I use the

Jeff, Do not give up yet, if you feel uncomfortable to do the one solder bridge then have someone do this for you. I did the mod on a FT891 which has two bridges to be made. I do not use the DATA

You DO study documentation on the WSJT-X main page before asking questions here, don't you? 73, Jim K9YC

Still doesn’t work for me. I’m giving up. -- Thanks & 73, Jeff K3JRZ https://www.qrz.com/db/K3JRZ 100WAAW #404

VERSION 2.4.0??? It’s not there in earlier versions. Darl NA8W

I just verified that, indeed, doing a "Halt Tx" and then "Enable" during a TX window will restore audio output. Sorry, I hadn't tried that thoroughly before. W0RDR

I only change during receive - it wouldn't make sense to do it in transmit. The connection is exactly as it was with 2.2.0, the ONLY change was to upgrade to 2.3.0. I'm using an Icom 7300 with a

I have also noticed this behaviour in 2.4.0-rc1. I have two separate installations of the software on two Rasperry Pi 4s running Raspbian GNU/Linux 10 (buster). Each RPi is dedicated to a different

Problem with ver.2.3.0 on My band (2m with transverter). Display shows 44,174MHz ( i have offset -100MHz in setup) and it's OK on RX, but on TX program pop up window with message that its. not correct

Dear Dave, That is what the Signalink manual says to do: set the audio level to maximum. Other reasons for drop outs in transmit include RFI. Use chokes to suppress common mode current on your cables:

On Sat, Feb 20, 2021 at 04:29 PM, Reino Talarmo wrote: I only change bands while receiving. The missing audio is often noticed on the first transmit after starting the program as well. The same fix as

Hi Corneliu, Are you sure that your system is in upper SSB mode? Kind regards, Kai, KE4PT