That did the trick Neil, thanks. I looked at it earlier but didn't see Q65 mode...after your comment I just did an edit and put "all" in for mode. Probably not the best way to have done it but

Mike, a reinstall of WSJT-X is not going to change anything, something has changed in your settings or rig setup. So I can see what is happening put the attached file into your WSJT-X configurations

Hi Nic, the FTdx101 has a function called AMC which is supposed to automatically limit the mic gain to avoid distortion. I would be surprised if that was active in USB-DATA mode but if it is it may

On 17/02/2021 19:27, Chris wrote: Hi Chris, that output is less than there should be. I would expect each device to appear twice, the second one with a "Wave ID". For example

WSJT-X suddenly stopped working on my FTDX10 and Mac mini 2018 with Big Sur 11.2.1. See screen shots below. After trying the usual remedies, I uninstalled WSJT-X, did a restart of the Mac, reloaded

Did you reset the Frequency list in settings? Neil, KN3ILZ On 2/17/2021 3:06 PM, Ben Nardi wrote:

In trying to set up Q65 on 6 Meters my frequency window is red and it seems no frequencies below 2 meters appear on frequency selection. I can type in 50.275 for example and that works but window

Thank you for the reply, Bill. Since last post I did another "hail mary" by uninstalling and deleting all the folders including those in appdata, and downloading a fresh copy. This gave me a fresh

Thank you Bill for the link how to set up the audio. I am aware of adjusting the audio mixer in Windows. This worked fine with my FT1000 and FTdx1200 where I set the mixer to a zero ALC reading at the

That's why there's third-party utilities, its not a core part of the program. Neil, KN3ILZ On 2/17/2021 12:53 PM, Michel Bernard VE2BJG wrote:

There is no grid listed in the DX GRID box ... so when the operator clicked to resend the 73, the system did not see a GRID since it was previously cleared. Neil,

For Q65 it looks like using configurations is a must. On the graph you need to set it to ‘Q65’ - if you just change mode the graph mode does not change. It works fine with a

Thanks for the reply, Charlie, I'll look into setting up different configurations as well. Cheers - Dave (G0DJA)

On Wed, Feb 17, 2021 at 01:03 PM, Bill Somerville wrote: If your QSO partner elects to send an RR73 message in reply to your R+report message then they should not expect any reply.Bill, that is a

Similar to JTDX, is it possible to get a WAV played when there is activity or a valid decode. Since activity is almost invisible when signals are weak, there would be less danger of falling asleep

John, look again at the exchange! EA4SM never sent his gridsquare. 73 Bill G4WJS. On 17/02/2021 18:18, JP Tucson, AZ wrote:

Actually, I am looking at the log box with the empty "grid" block. Something I have been trying to inform you about for a while. As you can see, it DOES happen to other users. But hey, whatever...

John, you must be looking at a different exchange from the one I see. 73 Bill G4WJS. On 17/02/2021 18:07, JP Tucson, AZ wrote:

Notice also that the logging box DID NOT PICK UP THE GRID SQUARE! ...though it is clearly listed in the data exchanges! 73 - John - N7GHZ

On 17/02/2021 17:59, Ken WB8UFC wrote: Ken, the only reasonable replies to an RR73 message are either nothing, a 73 message, or some free text message sending extra