main@WSJTX.groups.io

Re: Stopping Individual Messages - How? #GeneralGroupInfo

Last time someone had this issue, it turns out that had subscribed twice with different emails and one account was set yo all messages. I'll take a look under the hood for you. Andy K3UK

By Andrew OBrien · #22154 ·

Re: #Q65 Managing Expectations #Q65

Another way to say that , David, is: “…there is no ‘free lunch’…” But, then again, I don’t have a Nobel, the program is free and its winter… I’m willing to give it a try, and

By Ted K7TRK · #22153 ·

#Q65 Managing Expectations #Q65

There's been a lot of excitement and expectation that has been created by the release of the Q65 series of modes, in my opinion. There's been chatter about these being "the next new..." enter your

By David Ackrill · #22152 ·

Re: A Few Minor Q65 Things to Report #WSJTX_config #Q65

Obviously no one takes the time to read the Q65 Quick Start guide ... https://www.physics.princeton.edu/pulsar/k1jt/Q65_Quick_Start.pdf Neil, KN3ILZ On 2/12/2021 5:47

By neil_zampella <neilz@...> · #22151 ·

Re: A Few Minor Q65 Things to Report #WSJTX_config #Q65

Yes Bill, I agree, but that's not what many operators who are testing Q65 seem to be expecting... They are, maybe wrongly, assuming that Q65 will somehow replace FT8 or FT4. Much of the testing,

By David Ackrill · #22150 ·

Re: A Few Minor Q65 Things to Report #WSJTX_config #Q65

Hi Rex, No, they don't, at least not in some modes of Q65. For example, Q65 30A looks like this with Sh selected...

By David Ackrill · #22149 ·

Re: A Few Minor Q65 Things to Report #WSJTX_config #Q65

OK Bill. Thanks. Interesting. Thank youfor the reply. Joe, K1YOW

By Joe Dz · #22148 ·

Re: A Few Minor Q65 Things to Report #WSJTX_config #Q65

Hi Dave The spectrum below the waterfall has indicator letters T, M, R and 73 which correspond to the single tones and they move with reference to the frequency you are working such as 600 Hz to

By Rex Moncur · #22147 ·

Re: A Few Minor Q65 Things to Report #WSJTX_config #Q65

Hi Joe Checking Sh to send single tones such as @1000 Hz = tune, @1250 Hz=Send Messages, @1500 Hz=RRR and @1750 Hz=73 is the expected behaviour. It is used to complete very weak or marginal QSOs

By Rex Moncur · #22146 ·

Re: #Cat_RigControl #mac #Cat_RigControl #macOS

Thanks for the replies and suggestions. I tried all of them but no luck. The frustrating part is that this combination of hardware was working great not that long ago. In between I was using and Icom

By smith.rip@... · #22145 ·

Re: Lost audio #AudioIssues

I looked and looked but I can't seem to find a RigBlaster forum.. Does anyone know where that one is? Thanks all Dennis N6NG

By Dennis Jacobson · #22144 ·

Re: #Cat_RigControl #mac #Cat_RigControl #macOS

I have a TS-570S but I am going to guess that a few things are similar so let me throw out an idea. Change the handshake to hardware. My TS-570S uses a hardware handshake and I don't know if this is

By Kenneth Williams · #22143 ·

Re: A Few Minor Q65 Things to Report #WSJTX_config #Q65

Hi Joe, that is expected behaviour. The short code messages in Q65 mode *are* single tones. Single tones are used by some EME operators to complete QSOs with maximum

By Bill Somerville · #22142 ·

Re: #Cat_RigControl #mac #Cat_RigControl #macOS

in windows, 8 , none, 1 and also had to have dtr and rts high, maybe your should also be that way Dave Garber VE3WEJ / VE3IE

By Dave Garber <ve3wej@...> · #22141 ·

Re: #Cat_RigControl #Cat_RigControl

it sounds like more than one program trying to access the same port, maybe Dave Garber VE3WEJ / VE3IE

By Dave Garber <ve3wej@...> · #22140 ·

Re: A Few Minor Q65 Things to Report #WSJTX_config #Q65

I did a quick test toggling the "Sh" box and the "Tx6" box. I guess that "Sh" stands for 'Shorthand', as in the Shorthand messaging used in other modes? So, clicking on "Sh" changes Tx4 to

By David Ackrill · #22139 ·

Re: #Cat_RigControl #mac #Cat_RigControl #macOS

On 12/02/2021 21:13, smith.rip@... wrote: Hi Rip, the default baud rate for the USB virtual serial port is 115200, you have 9600 in WSJT-X which is probably wrong. 73

By Bill Somerville · #22138 ·

#Cat_RigControl #mac #Cat_RigControl #macOS

Hello all I just swapped in my Kenwood TS-590sg and attempted to get it up and running with WSJTX. I had had this setup working nicely a few months ago but I put in a different radio for a while. When

By smith.rip@... · #22137 ·

#Cat_RigControl #Cat_RigControl

Hello, I am using OMNIRIG 1.19 together with SDR console V3.0.26, FT817 with microham USB III interface and it´s virtual coms. All settings OK all function OK for the SAT. Now I want to add

By Lutz-DL9DAN · #22136 ·

Re: A Few Minor Q65 Things to Report #WSJTX_config #Q65

I found out what the issue was, and it isnot configuration change related but it only happens when in Q65. On the IC-9700, I had Sh checked from thelast time I ran MSK144 on 2 meters. So, no

By Joe Dz · #22135 ·