main@WSJTX.groups.io

Re: A Few Minor Q65 Things to Report #WSJTX_config #Q65

OK Bill. Thanks. Interesting. Thank youfor the reply. Joe, K1YOW

By Joe Dz · #22148 ·

Re: A Few Minor Q65 Things to Report #WSJTX_config #Q65

Hi Dave The spectrum below the waterfall has indicator letters T, M, R and 73 which correspond to the single tones and they move with reference to the frequency you are working such as 600 Hz to

By Rex Moncur · #22147 ·

Re: A Few Minor Q65 Things to Report #WSJTX_config #Q65

Hi Joe Checking Sh to send single tones such as @1000 Hz = tune, @1250 Hz=Send Messages, @1500 Hz=RRR and @1750 Hz=73 is the expected behaviour. It is used to complete very weak or marginal QSOs

By Rex Moncur · #22146 ·

Re: #Cat_RigControl #mac #Cat_RigControl #macOS

Thanks for the replies and suggestions. I tried all of them but no luck. The frustrating part is that this combination of hardware was working great not that long ago. In between I was using and Icom

By smith.rip@... · #22145 ·

Re: Lost audio #AudioIssues

I looked and looked but I can't seem to find a RigBlaster forum.. Does anyone know where that one is? Thanks all Dennis N6NG

By Dennis Jacobson · #22144 ·

Re: #Cat_RigControl #mac #Cat_RigControl #macOS

I have a TS-570S but I am going to guess that a few things are similar so let me throw out an idea. Change the handshake to hardware. My TS-570S uses a hardware handshake and I don't know if this is

By Kenneth Williams · #22143 ·

Re: A Few Minor Q65 Things to Report #WSJTX_config #Q65

Hi Joe, that is expected behaviour. The short code messages in Q65 mode *are* single tones. Single tones are used by some EME operators to complete QSOs with maximum

By Bill Somerville · #22142 ·

Re: #Cat_RigControl #mac #Cat_RigControl #macOS

in windows, 8 , none, 1 and also had to have dtr and rts high, maybe your should also be that way Dave Garber VE3WEJ / VE3IE

By Dave Garber <ve3wej@...> · #22141 ·

Re: #Cat_RigControl #Cat_RigControl

it sounds like more than one program trying to access the same port, maybe Dave Garber VE3WEJ / VE3IE

By Dave Garber <ve3wej@...> · #22140 ·

Re: A Few Minor Q65 Things to Report #WSJTX_config #Q65

I did a quick test toggling the "Sh" box and the "Tx6" box. I guess that "Sh" stands for 'Shorthand', as in the Shorthand messaging used in other modes? So, clicking on "Sh" changes Tx4 to

By David Ackrill · #22139 ·

Re: #Cat_RigControl #mac #Cat_RigControl #macOS

On 12/02/2021 21:13, smith.rip@... wrote: Hi Rip, the default baud rate for the USB virtual serial port is 115200, you have 9600 in WSJT-X which is probably wrong. 73

By Bill Somerville · #22138 ·

#Cat_RigControl #mac #Cat_RigControl #macOS

Hello all I just swapped in my Kenwood TS-590sg and attempted to get it up and running with WSJTX. I had had this setup working nicely a few months ago but I put in a different radio for a while. When

By smith.rip@... · #22137 ·

#Cat_RigControl #Cat_RigControl

Hello, I am using OMNIRIG 1.19 together with SDR console V3.0.26, FT817 with microham USB III interface and it´s virtual coms. All settings OK all function OK for the SAT. Now I want to add

By Lutz-DL9DAN · #22136 ·

Re: A Few Minor Q65 Things to Report #WSJTX_config #Q65

I found out what the issue was, and it isnot configuration change related but it only happens when in Q65. On the IC-9700, I had Sh checked from thelast time I ran MSK144 on 2 meters. So, no

By Joe Dz · #22135 ·

Re: Sudden "blindness" to audio windows 10 #Cat_RigControl #AudioIssues

All are present and available to other applications. Chris, AB6QK

By Chris · #22134 ·

Re: Sudden "blindness" to audio windows 10 #Cat_RigControl #AudioIssues

That was my suspiscion, But rolling back the update did not change anything. The radio is a Kenwood ts-450s which is properly selected in the settings. There is no special driver for this radio.

By Chris · #22133 ·

Re: Sudden "blindness" to audio windows 10 #Cat_RigControl #AudioIssues

Ironically, the only device showing is the Windows Default. No, the device needed is not the Windows default. The device I'm using for the Kenwood is a c-media pci card, which works fine with other

By Chris · #22132 ·

A Few Minor Q65 Things to Report #WSJTX_config #Q65

All seems to work well. Just a couple of small things to report so far. I run a TR590SG in one configuration and an IC-9700 in a second configuration. Running V2.4.0-rc1, Windows 10, 64 bit. 1. In

By Joe Dz · #22131 ·

Re: Implied Hold Tx Freq was #IssueReport

>You did misunderstood the situation when it happens. I am not calling CQ (in search-and-pounds) and I the "Hold-TX-Freq" is not checked. Geza, Many users prefer to follow the recommendation to

By Reino Talarmo · #22130 ·

Re: Unfamiliar signals in waterfall #FT8 #Waterfall

It looks like a Q65 mode , someone transmitted it by mistake 73, N0AN Hasan

By Hasan Schiers N0AN · #22129 ·