I had this same experience with 4U1UN on 30M. After sending my transmission several times at about +750, the QSO completed. I noted that while many of the stations calling were loud, they were

Dave, "kicked into the weeds" is not what is happening here. If you can't complete with the Fox in a couple of overs WSJT-X will shift you up a couple of hundred Hertz to allow stations with better

I am reporting a problem trying to use WSJT-x and the above configuration I started with release 1.1 and it was working perfectly, release 2.2 and 2.3 are giving the same results: no tone output to

Hi Pat, please upgrade to v2.3.0. 73 Bill G4WJS.

Hi, I just installed WSJT-X 2.4.0 RC1 on a RasPi over 2.2.0. Now I have an error on starting WSJT-X. It says : locale::facet::_S_create_c_locale name not valid 73's de PE1EVX, Alex

Just loaded 2.4.0 rc1 and was monitoring jt4d and jt4F, both crashed with error EXIT CODE 2, and the following detail:: reinstall v2.3.0 and all ok. Running: C:\WSJT\wsjtx\bin\jt9

Hi Jim, With earlier versions v1.8.0 or so I had quite often restart also PC in that kind of situations. Also rig needed to be powered up before starting wsjt-x. Just a wild guess could there be

here is his adif file in my wsjt log <call:4>K4YT <gridsquare:4>FM19 <mode:3>FT8 <rst_sent:3>-10 <rst_rcvd:3>-16 <qso_date:8>20200906 <time_on:6>085345 <qso_date_off:8>20200906 <time_off:6>085615

correction his call is k4yt sorry Karl for hacking up your call. Pat

Hi, Personally I find this little frequency box very useful! 73, Reino OH3mA

Amen 73 de NØIGU Jon

Hi Jim, see this message posted to the wsjt-devel list on Source Forge: https://sourceforge.net/p/wsjt/mailman/message/37212133/ 73 Bill G4WJS.

Hello All, I am running macOS Big Sur and wsjtx 2.3.0 with no trouble. Just installed wsjtx 2.4.0-rc1 and it starts ok but about 45 seconds it closes down. No error report or nothing. Has anyone got

Hi interestingly for me 2.3 did exactly the same as rc3: that is installed OK , ran, then exited silently after around 4 minutes leaving nothing in the events log. Rebooting the PC fixed it. I am

Just to add my recent experiences to this thread... In late October 2020 I commissioned a new PC for my 'radio' apps - the PC is a Dell 3070 with an i7-9500 CPU, 16G RAM and a 512GB SSD, running

Louis, WSJT-X continues to poll the rig via CAT. As I said turning off monitor disables *active* CAT control, that means it should make no changes to rig settings in that state. 73 Bill G4WJS.

Bill, 2 things here. My Yaesu FTDX5000 has a CAT lite that is enabled when its com port is being used by WSJX and anytime CAT is on the lite stays on and second I am using Virtual Serial Port

Hi Louis, what makes you think active CAT control is not relinquished when "Monitor" is not enabled? 73 Bill G4WJS.

For some reason or another that does not release the CAT, it just stops the software from receiving. The way the older software worked for me was that if the frequency you shifted to was not in the

Dave, you will end up with 2 wsjtx_log.adi and wsjtx.log files. 73's de Kari, oh2gqc