Hi, With V2.2.2  (and/or with any symbiotic software)  is there any setting that will prevent automatically requesting/forcing the rig to power up? --73, Glenn, AF8C -- This email has been

Jim N7US sent me his configuration and that approach solved my problem: In WSJT-X, don't use CAT PTT, use RTS PTT via a COM port. In Microham Router, check PTT box for that COM port. Now, rig

The errors in that configuration were from WSJT-X, something like "WSJT has detected rig control errors" with Retry/Cancel and a few other options. Ran into this a few years ago when first getting

Thanks Bill Not sure why it asks for elevation, except that the shortcut properties show the owner as the Administrators group - I may have seen something on line that suggested it should be. I'll

Hi Jon, do not run WSJT-X with elevated privileges, there's no good reason to do that. To run multiple instances of WSJT-X concurrently you must use the --rig-name= command line

HI I run WSJT-X for Rx-onIy under Win 10. Mainly for WSPR, but occasionally FT8 for some faster spots. ( Currently the WSPR beacon is stand alone). The machine uses Windows feature update 20H2 and

Hi David, not sure on the frequency for you in the US, we probably added it as a straw man placeholder. When you use the N1MM Logger+ integration it starts a separate instance of WSJT-X with its own

Is the frequency of 1296.065 good for FT8? It's not one of the modes mentioned in the default list for that band. Need to know for the contest this weekend. Also, when setting up N1MM and WSJTX

Yep, Michael your reply is the first thing I thought of when I read the original query, I have used that same technique to make a qso with new area or grid. 73 // John K3NOQ

I am late to this party. As far as I know there is nothing to prevent me from turning off Monitor and then scrolling the Band Activity window back a really large amount of time, and then

My K3 uses LPBridge to integrate, also with DXLabs programs and it also "stutters" on changing frequencies (not band changes but changes of Tx QRG in the audio bandwidth). It might sometimes cause up

Well i do. I use SDR Console, Voicemeeter Banana and WSJT hooked to JT alert. Took a bit to get it figured out but it do work and works quite well. I do not use it to transmit though,

Can you explain how you switch to MySQL. Is this some kind of feature in HRD? I use Win10 and HRD with my FTdx3000 and wsjt-x and have been pleased. My log has about 3,000 QSOs, but wsjt-x logs new

Thanks for the correction, Reino. I'll try to remember that specific constraint in the future! 73 -- Martin G0HDB

What kind of rig control errors? Have you posted the error messages? What are your settings for the "Forward autoinformaton to CAT port" settings in Router -> CAT -> SET (Which port is Commander and

Hello Bill, I still can’t get rc3 to run keep getting that error. Can you tell me what is going on. I can run 2.3.rc2 good but when I install 2.3.rc3 I get an error. Hope you can help me. Here is a

>The same DX station or whatever station is still there after restart, but WSJT-X selects CQ and transmits CQ when Tx is enabled. How frustrating is that? When there are too many CQs it's called air

Thank you for that info. I will turn off the gaming mode but I do frequently use the screen or video capture features so I'll need to remember to reenable it when needed. My largest boost in

The same DX station or whatever station is still there after restart, but WSJT-X selects CQ and transmits CQ when Tx is enabled. How frustrating is that? When there are too many CQs it's called air

Perhaps there is a baud rate issue.