Hi all, Rik, thanks for sharing your driver circuit. I can't really say I understand it yet, but I will save it for reference. Peter, I would be interested to see your first circuit and also the one

Hi Paul, all, as could be expected the signal has the same (or better said mirror) shape at the end of a transmission. I just checked that for FST4-60 and I assume that applies also to FST4W and other

FYI : REgarding tags or hashtags for this group Hashtags are words that start with '#'. In the case of Groups.io, they only apply to the subject of a message. So, if you send a message to your group

I suspect that the authors had to get Q65 information out so that it would be added to the next ADIF standard. Unfortunately, it has an unwanted side affect as people don't read past the

It showed up on the ARRL web site as well. http://www.arrl.org/news/wsjt-x-2-4-0-introduces-new-digital-protocol-q65 73 -Jim NU0C "Bill Somerville" <g4wjs@...> wrote:

Happy New Year . January 2021 marks the first anniversary of this group's merger with the old WSJT Yahoo group. The merger went quite well. I tried to minimize group rules and overall members have

Why not? New cars are advertised months ahead of introduction in the US. I enjoy hearing about new things, it gives me an idea of what’s coming and what to look forward to! Darl NA8W

Hello everyone, Thanks for the continuing interest. I've consolidated a few responses and comments below. First, it might be useful to point out that my Class D PA is built around the G0MRF module,

Hi Daniel, good question, we wondered the same about them. 73 Bill G4WJS.

Why are there many articles about 2.4 when it is NOT available to download. 2.3 has not come out of RC status.

Jim, the information is in a pinned post on this forum https://wsjtx.groups.io/g/main/message/13890 73 Bill G4WJS.

The new version of Raspberry Pi OS now uses Pulse Audio for sound. Install the pavucontrol application to control the sound settings. sudo apt-get install pavucontrol

I just fixed a similar problem. I have a TS-570 and I was doing some plugging and un-plugging of some cables and when I went to get back on the air, I had PTT but no TX. I send my audio in from the

Scotty, please search the message database for the term Error in sound input An answer is likely provided. Andy K3UK

I had no problems at all with my Icom 7300 until I was apparently dumped a windows update last night. I know this because I got the Recommend this update to friends message. Anyway, I've been using

Re: Bill Somerville's reply, message 4914, dated 12/12/19. Bill provides instructions for setting the correct Tx audio level with the 64-bit version of WSJT-X in a link that connects to the now

Hi Steve, I observed exactly same issues during week end contest as well. 1. I assume that this feature is intended one to keep logged information as user has accepted it. The AP information

Steve, I was using v2.3.0 rc2, also. The a1, a2 appendages to the messages were showing up occasionally for me, too. But, I had my decoding set to Normal. Sometimes, the Exchange info was missing and

Thanks for the reply, Bill. I'm replying to message #16166 from kgkuzmin (the one at the top of this thread). I first get a 'Rig Control Error' dialog box, the complete text of which is: 'Hamlib

While I don't always use it with a Pi3, my 7300 and WSJT-x work great on it Ken ------------------------------------------------------------------------------ President and CTO - Arcom