Where is WSJTx, version 2.4.0, that was recently announced on the ARRL home page? - John, N0TA

I guess I'm not the only having this problem. 73s Bill WA8VIH EL98

Had a transmit problem with both FT4 and FT8 this weekend during the RTTY RU contest. The data would transmit for a couple seconds (heard it in the monitor, and saw output power), then the data stops.

I don't think you can halt the shutdown once it starts. Why not create a new power management profile: Start > Settings > Power > ... and create a new profile that has:

Chris, Paul Thank you for your comments, which I think indicate there is an issue to be at least understood. Chris, your waveforms look much like mine from the TS-890S. I don't know if you had a

Scott I had the same problem with my FT-991A. First thing you should do if you haven't is turn on the monitor during a transmit. I'm not familiar with the 950 but assume its menu structure is

My laptrop pc will shut down on its own. I have changed the active hours setting to an 18 hour period that best facilitates my operating schedule. And, the computer will shut down when I am using it

I've run into the same problem. FLDigi, JS8, and Winlink work fine. WSJT and JTDX both started to drop out around lunch time yesterday. I rebooted, uninstalled reinstalled. Unplugged and moved to a

I also experienced the same problem. Spent a lot of contest time troubleshooting and many lost Q's. I had well over a dozen crashes. Luckily I only had to reload WSJTx and not reboot the computer.

I have the exact same problem. I unplugged my interface while the program was running. It blew a fuse in my interface. I have a new one coming in the mail. In the meantime it appears that the error

I am having difficulty compiling this from source on a Mac (Catalina) I pulled the tarball and have extracted the files… and - I now am creating the makefiles like this cd <dir where un-tarred> rm

On 03/01/2021 22:23, RichardH wrote: Richard, it is not clear to me which message you are replying to. Please include the full error message, including the details. You can

I had similar issues with my SignaLink. I have an ICOM 735. I fiddled with the mic gain a little, ie, lowered it a tad, and then jiggled the power slider in WSJT-X on the right side of the screen to

Used Version 2.3.0 rc2 only on FT4 with Normal Decode for many hours both days of the RU on WIN 7 and Radio marked as None and had NO crashes. Hope that helps the investigation. 73/HNY, Bob K8BL

I had a similar situation here. I tried it both through N1MM and as stand-alone and had crashes both ways -- Anthony Luscre K8ZT Ohio Section Section Youth Coordinator & Education Outreach ARRL -

Nope, I can get DM780/ITunes to work, but then the sound from WSJT-X omes thru the speakers.

Same here. Yaesu FT-991 & Big Sur (macOS 11.1). I had to get another build of the DMG (from SiLabs support) after the official release crashed on me during install. Thanks &

I had multiple crashes too. After looking at the messages her I found a suggestion to change Deep decode to Normal for FT4 only. I did that and it still crashed. First time I've seen it should be

Should have been more specific. FT-950 with RigBlaster Advantage, & running Win 7. Tried the Setting Windows WSJT-X Tx audio levels post instruction but no joy.

I'm have exactly the same issue and since the program crashes regardless of what option I choose, there is no opportunity to experiment with different settings. Rig-IC7410; PC-Dell Optiplex 5050