Run v2.3.0-RC2 On 1/2/2021 12:27 PM, Patrick Hung wrote:

I'd ask on a JTDX group as it isn't supported here Neil, KN3ILZ On 1/2/2021 10:55 AM, Andy_501 wrote:

I went up to the computer in the radio shack and got more specific answers for you. The filtering I was talking about is at the top of Call Roster as shown below. If you need help on the filtering ask

Bill, to see if you can do that, in Windows File Explorer on a different computer, click on Network Neighborhood. If you see the other computer in the Neighborhood, you can replace the IP address with

Thank you, Charles, I'll give those freqs a try. Best regards, Patrick Hung -- 73, Patrick, W6AJR

OK, thanks sir! 73, and thanks, Dave (NK7Z) https://www.nk7z.net ARRL Volunteer Examiner ARRL Technical Specialist, RFI ARRL Asst. Director, NW Division, Technical Resources

I did answer this in the “Auto Uploading to LoTW and QRZ” thread. My answer was: GridTracker identified a callsign on the air that you have not previously had a QSO with. The criteria for

I forgot to mention that the comment is editable, too. Chuck Schultz k4cay.chuck@... 256-525-7436

I am not looking at it right now so I may not get all (or any) of this correct. Somewhere in the menu system (alerts?) there’s an option to shut that comment off. Also it may explain it in the

It is an expiry date built into that SW version. P-T/LA7NO

I noticed I have about two weeks left on the latest rc2 candidate. Is that date based on something coded, or based on how long the software has been run? -- 73, and thanks, Dave

I really like the idea of using the computer name. How would I configure this? Just type it in place of the IP address? And then the colon and port number? -- ---- 73 - Bill - KA0B ----

Hi Floyd, I believe you can disable the audio devices associated with your HDMI connected monitors is you are not using that part of their functionality. If they are disabled then power saving

Apologies if this is out of the scope of the forum, so I will take a slap on the hand if it is. It's just I have a grid tracker question and I think someone must think I'm pulling their leg, because

This is the route I went and it works well now. Thanks to all. -- ---- 73 - Bill - KA0B ----

As more than one of you have suggested, two of my three monitors are indeed HDMI and I didn't give any thought to the fact that there were sound devices associated with them. To test and verify this

I recall this being an issue in the FT Roundup a few weeks ago - I'm experiencing the same now in FT4, running version 2.2.2. Is there a fix? Thanks. -- 73, Patrick, W6AJR

 Hi Austin, you are correct, but he reported issue was with the Color Highlight Scheme window ("Menu->View->Color highlighting scheme"). 73 Bill G4WJS.

On 02/01/2021 15:42, luc@... wrote: Hi OM, thanks for the issue report, I can confirm this is a defect which is fixed for the next release. 73 Bill G4WJS.

According to the 2019 QST article the contest rules referred me to, look around 3590-3600, 7080-7100, 14130-14150, 21130-21150, and 28160-28200. Charles Schultz Anniston, AL k4cay.chuck@...