main@WSJTX.groups.io

Re: Grid Tracker

I am not looking at it right now so I may not get all (or any) of this correct. Somewhere in the menu system (alerts?) there’s an option to shut that comment off. Also it may explain it in the

By Chuck - KY4CU · #20088 ·

Re: Expiry data question

It is an expiry date built into that SW version. P-T/LA7NO

By LA7NO · #20087 ·

Expiry data question

I noticed I have about two weeks left on the latest rc2 candidate. Is that date based on something coded, or based on how long the software has been run? -- 73, and thanks, Dave

By Dave (NK7Z) · #20086 ·

Re: Flex Smart SDR CAT to WSJT-X #WSJTX_config

I really like the idea of using the computer name. How would I configure this? Just type it in place of the IP address? And then the colon and port number? -- ---- 73 - Bill - KA0B ----

By BillTilman2@... · #20085 ·

HDMI Monitor audio device power saving - was Re: [WSJTX] Annoyance!

Hi Floyd, I believe you can disable the audio devices associated with your HDMI connected monitors is you are not using that part of their functionality. If they are disabled then power saving

By Bill Somerville · #20084 ·

Grid Tracker

Apologies if this is out of the scope of the forum, so I will take a slap on the hand if it is. It's just I have a grid tracker question and I think someone must think I'm pulling their leg, because

By Austin 2E0MNV · #20083 · Edited

Re: Flex Smart SDR CAT to WSJT-X #WSJTX_config

This is the route I went and it works well now. Thanks to all. -- ---- 73 - Bill - KA0B ----

By BillTilman2@... · #20082 ·

Re: Annoyance!

As more than one of you have suggested, two of my three monitors are indeed HDMI and I didn't give any thought to the fact that there were sound devices associated with them. To test and verify this

By Floyd - K8AC · #20081 ·

WSJT-X Crashing in RTTY Roundup FT4

I recall this being an issue in the FT Roundup a few weeks ago - I'm experiencing the same now in FT4, running version 2.2.2. Is there a fix? Thanks. -- 73, Patrick, W6AJR

By Patrick Hung · #20080 ·

Re: Dark mode in WSJT-X 2.3.0-rc2

Hi Austin, you are correct, but he reported issue was with the Color Highlight Scheme window ("Menu->View->Color highlighting scheme"). 73 Bill G4WJS.

By Bill Somerville · #20079 ·

Re: Dark mode in WSJT-X 2.3.0-rc2

On 02/01/2021 15:42, luc@... wrote: Hi OM, thanks for the issue report, I can confirm this is a defect which is fixed for the next release. 73 Bill G4WJS.

By Bill Somerville · #20078 ·

Re: RTTY RU FT8/4 Calling Frequencies

According to the 2019 QST article the contest rules referred me to, look around 3590-3600, 7080-7100, 14130-14150, 21130-21150, and 28160-28200. Charles Schultz Anniston, AL k4cay.chuck@...

By Chuck - KY4CU · #20077 ·

RTTY RU FT8/4 Calling Frequencies

What are the "watering holes" frequencies for FT8/4 for the upcoming RTTY Roundup? There's quite a bit of "normal" traffic on 7.074, 14.074, etc. Thanks. -- 73, Patrick, W6AJR

By Patrick Hung · #20076 ·

Re: Annoyance!

Hi, Turning off the monitor sleep worked for me, using W10 OS, and it was the HDMI issue. Since doing that(over a year ago), the issue has never re-occurred. 73 Bob G8HGN

By Bob G8HGN · #20075 ·

Re: Annoyance!

Are the monitors HDMI? If so they contain audio (playback) devices and allowing them to sleep will cause Windows to renumber all audio devices. Renumbering (reenumerating) audio endpoints (devices)

By Joe Subich, W4TV · #20074 ·

Re: 2.3.0-rc2 STILL NOT LOGGING PROPERLY!

John, I could not get from your mails what actually happens. It could be what I call “interleaved QSOs challenge”. Your ALL.txt lines well before and including logging time could give a hint,

By Reino Talarmo · #20073 ·

Re: Decode lag

Just managed yesterday to get JTDX working reliably on Linux ubuntu 20.04LTS OS ; IC-7300 rig; JTDX v 2.2.0rc.155 hardware list: *-cache:0 description: L1 cache

By Andy_501 <andrew.webb.501.ve4per@...> · #20072 ·

Dark Green 73 and RR73 'flags'

I noticed a couple of weeks ago the incoming Band Activity decodes were featuring a dark green background behind only the 73 and RR73 entries---not the whole row, just the 73 and RR73 areas. See

By Dale Martin, KG5U · #20071 ·

Re: Re installation

Hi Bill, Many thanks for that, seems to have done the trick. Happy New Year! Regards 73 Phil G8PJH

By Phil Hazelton · #20070 ·

Re: How to remove Wsjt-x completely

Hi Jay, do you want to remove WSJT-X or do you want to fix the issues you have with audio between your rig and PC? 73 Bill G4WJS.

By Bill Somerville · #20069 ·

Messages