Hamlib to FlexRadio - not connecting I am having trouble with WSJT-X connected to my Flex 6400 after a reset. WSJT was controlling the FlexRadio through the original setup as outlined in the

Austin, I had the same problems with both a MacBook Pro and an iMac. The research I did led me to the conclusion that it was a hardware issue. It would cause output to switch to the speaker daily.

Thanks Jim. Will study and do adjustments and get back to you. Also today I realize that I am around 500ft away from big electric power distribution lines. What really puzzle me is that it is only

Hi. The only bands that are not seen are on 1.8 Mhz, 3.5 Mhz, 144 Mhz, 440Mhz. All other bands show noise with worst in 10Mhz and 14Mhz

Had tried with multiple cables same luck. I just ordered a USB cable with a ferrite included. Should arrive next week. Will keep you posted.

I have a 705 connected via USB, it receives and decodes great. When WSKTX transmit it lose the connection to the PC. Had you guys seen this before?

I agree I LIKE TAB #2 LEAVE IT IN, people have a choice then if they want to use it. Are you listening developers??? Bob Bencsko - W7AMC Las Vegas, NV DM26

The windows "USB Selective Suspend" is notoriously unreliable. It will occur for a variety of reasons unrelated to inactivity. That is why *all* of my Windows systems have the Power Options set

It happens any time, but just to clarify, it doesn't happen mid transmission. It happens in between transmissions. You never know when it will happen, but you hit TX and the sound goes to the

Hi everyone, hope you are all keeping well. I have just installed the 2.3.0 rc2 and found the tab 2 messages missing, i have read in the release notes that it was removed in rc1, i love the layout of

You might try using /dev/serial0 or serial1. charles kg5zlh

Does it happen during CQ's as well? 73 Roger G#4HZA

I would like to think it was something as simple as that, but this happens randomly at any time, not during periods of inactivity. I'll be making multiple QSOs and then suddenly, audio through

Sounds to me like a huge operating system on a minimal CPU. View system resources to see how busy the system/CPU is. During a decode you may see one core/thread at 100%. The decode elapsed time

Well Joe, it may be just that simple. Back in the spring I installed a new HP PC in the station after decades of using only home assembled PCs. It took many days to overcome all the HP "features"

Hello Karl and Neil, That was it !!!! THANK YOU !!!!!! I double clicked on Tx4, it changed over to RR73 and now the log window opens after each QSO. I have no idea how that changed unless

Hi Chris Thank you for the information. It's very useful to know of a similar problem, especially since you're using an entirely different exciter. I condensed the story a bit for a concise

VIN - My install sends RR73 as the Tx4 message, and it terminates the automated contact sequence upon receiving 73 from my contact. Are you sure you are using the messages preloaded into tab #1,

If you can get into the settings tabs for WSJT-x make certain the baud rate matches that of the RPi serial/usb cable as well as that of the radio..... I’m using a Pi to run an Elecraft KX2. The

Yes, Keep in mind that the band is very busy and a QRP signal is often lost. Just today I was on 20 watching South Africa pop up but not able to work it. Dave KC3AM