Yes, that was the first thing I checked. /dev/ttyUSB0 is in the dialout group, as is the user pi. I've logged in and out and rebooted several times with no change.

Hello All, Thanks for your suggestions. I just had a goal to get a number of contacts before the end of the year. As I write I have a few hours left of this year. But have given up and will look to

Vin, it sounds like somehow you double clicked on the Tx4 radio button, which can switch from RR73 to RRR. Double click there to switch back to RR73. Neil, KN3ILZ

Ron, have you tried asking for assistance on the hamapp.groups.io list? I also use JT-Alert, to DXKeeper, but I have DXKeeper upload to LoTW, QRZ, eQSL, and Clublog.

Hi OM, have you added your user id to the dialout group? sudo adduse $USER dialout then log out and back in (log out the whole desktop session, not just the terminal), reboot if

Tim... Great idea!! I'm gonna try that for those close-in States I need. ...73, Bob K8BL

Andy, What software is he using to synchronize the time? 73, Danny NF4J

Hello Peter, I'm using a Class E amplifier and am having similar issues to you. I've not investigated deeply so far and have no problems with WSPR but on FST4 modes the power supply often momentarily

False decodes do happen. I was called by 3G6MZN out of the blue today. Apparently that's Chile, but it can't be found on QRZ.com or anywhere I look. No way. I would bet a million dollars that was a

Hi, I'm fairly new to WSJT-X, but I have gotten it up and running on my Ubuntu desktop with my IC-7200. I built a Raspberry Pi to use specifically for digital modes using KM4ACK's Build-a-Pi v3. I've

GridTracker identified a callsign on the air that you have not previously had a QSO with. The criteria for identification is based on the filtering criteria set up in GridTracker. John,

This happens to me almost daily. I'm usually up early chasing FT8 DX on 80M and when I'm done I just leave WSJT-X up and come back for more in the late afternoon. About 50% of the time, the audio

I had a problem going to the lower bands myself. What I found was that my radio was automatically set to go to lower sideband on the lower frequencies. Make sure your radio isn't switching to L S B

+ AA6YQ comments below Good morning, Ronnie I use a DXKEEPER add on LogPublisher program that does exactly what your looking for. I use it with JTALERT. Once the contact is completed and logged into

Hi Gary, The logging window no longer comes up because the Tx sequence has changed. After calling CQ and receiving a report, the sequence 'used' to go to Tx5 sending the 73 and having the logging

The logging window should only come up when you send one of the responses containing 73. 73 is the trigger as I understand it. Gary - AG0N

On the contrary. QRZ is a full service log book. Here is a screen shot of a logged QSO I made this morning and logged to QRZ. Of course it contains everything for confirmation when I

Ok, thanks, I will try and see if I get disconnected from the rig again. It is intermittent and random which makes it hard to trace.

Hi Austin, with WSJT-X v2.2.2 you will need to restart WSJT-X to see the new audio devices. 73 Bill G4WJS.

Hi Jeff, unless QRZ or QRZCQ handle management of awards using eQSL and LoTW etc. then for you they do not seem to be a "full service log book". I was under the impression that these services have a