Sorry. Gave the OS info didn't think of the radio. IC7300 - USB cable for all. And again, this all works well using Windows running Parallels from the Mac. This only occurs when I try to run it

http://k9yc.com/GroundingAndAudio.pdf Study this tutorial on Grounding and Bonding, and implement it. Also, virtually all ferrite cores are designed for use at VHF. To make them effective at HF, we

Hello Bill, Thanks for yr suggestion. Thus I can manual control my TS2000, when I switch off “monitor”? Use PTT and tx/rx in CW mode? Br. Jan, PAoPLY Verstuurd vanaf mijn iPad

Hi Dave, I suspect the issue may lay directly or indorextly with Win4Yaesu, to check that try closing down any other software that is also using Win4Yaesu to control your rig. If that doesn't work

Bill, Sorry for the long email. I wanted to provide as much data as I could about what I'm seeing. Thanks for the excellent response. I've been running "None" due to not knowing how things worked. I'm

Hi Randy, That would be nice, but already call/n, where n = 1, 2, .. 9, 0 is a “special” call sign. Call/Wn would be double special call sign. That means not enough bits are available for that

Hi Randy, FT8, FT4, MSK144, and other new modes like FST4 do not have Type 1 and Type 2 compound calls. They simply have standard format calls and non-standard format calls. You have two choices,

Hello Dave, Thank you for sharing your set up with me. This is the way I am going to go. Jacques W2/F2YS.

Thank you Bill for the very informative response In addition to the 2 other group members suggestion I am switching the radio setup to Rig. Best to you and yours for the Holidays. Jacques

Does your licencing authority require you to sign /W0 or is it optional? In the UK we are obliged to change our call depending which country we are operating in but there is no obligation to sign /m,

I am new to this forum as well as to FT8 so I am not sure if this is the correct group to request consideration for FT8 program enhancement suggestions. While this would affect a small number of

I got a Flex in 2016 so I've not had to use a sound card interface since then. Good to know that Tigertronics has resolved the issue. Ria N2RJ

On 28/12/2020 02:56, Jacques Pecourt wrote: Hi Jacques, both "Split Operating" "Rig" and "Fake It" have the same purpose which is to optimize your transmitted signal in two

Hello everyone, I've just joined this group and would be interested to know if anyone can shed some light on an issue I'm experiencing. I do quite a bit of work on 630 m using a TS-890S exciter and a

my steps work, if you find a spot first , then go searching and poucing... Dave Garber VE3WEJ / VE3IE

Hi Markku, On 28.12.2020 14.56, Markku SM5FLM wrote: Unfortunately no, the mouse behaviour is 'hard coded'. I fully agree. Changing tx-frequency is the most used

Agree –but I often wish to move my transmit frequency during a transmission without losing the ham I’m receiving. 73 -- Larry -- W1DYJ

if you right click and let both receive and transmit go together, then when you click on a " qso partner" only receive will move and your transmit will stay, if you have 'hold Tx Freq' selected Dave

I use fake it, so my vfo b can remain whatever I set it to , and does not get changed Dave Garber VE3WEJ / VE3IE

Also agree. 73 -- Larry -- W1DYJ