main@WSJTX.groups.io

Re: USB Audio CODEC

Kelvin You don't say what operating system you are using but I assume it is windows? Have you followed the manufacturer's instructions to download and install the USB audio

By Roger · #19788 ·

USB Audio CODEC

Hi, I thought it is about time I tried out Digital Modes. I’m trying to set up WSJTX for the first time. I’m using an Icom IC-756 Pro and HRD. I have testedthe CAT connection and transmit and

By kelvin348@btinternet.com <kelvin348@...> · #19787 ·

Re: UHF / SHF frequencies #WSJTX_config

Thanks to all who replied. Charlie gave me the solution: mode was set to FT8. If have been using FT8 in recent years on SW and JT65 on EME. But I was not qrv for some years becaus lack of antenna(s).

By dk1vi · #19785 ·

Re: Installing Version 2.3.0-rc2 on Big Sur (11.1)

Hi Bill, you haven't mentioned what rig you have and how it is connected to your Mac for audio and CAT control. 73 Bill G4WJS.

By Bill Somerville · #19784 ·

Re: Installing Version 2.3.0-rc2 on Big Sur (11.1)

I poked around and choose a driver called /dev/cu.usbmodem143201 I am decoding signals, so I assume I am good to go. -- Bill W8BC

By Bill, W8BC · #19783 ·

Re: Hamlib error on ft991.

Bill, The errors I am getting are not easy to reproduce but I also always get a sound card error - sorry I thought it was a Hamlib error and I was writing from memory. I have been ignoring this to

By George Nelson <grn@...> · #19782 ·

Re: Installing Version 2.3.0-rc2 on Big Sur (11.1)

Thanks, Bill I am now in the Radio tab trying to select the correct serial port. I am not sure what I am looking for. I understand that Big Sur already has the necessary driver built in, but what is

By Bill, W8BC · #19781 ·

Re: Installing Version 2.3.0-rc2 on Big Sur (11.1)

I should add that I am running an Intel Mac. -- Bill W8BC

By Bill, W8BC · #19780 ·

Re: Installing Version 2.3.0-rc2 on Big Sur (11.1)

Hi Bill, there is a small error in the ReadMe.txt file. The parameters are correct, you should find that WSJT-X v2.3.0 RC2 runs OK. 73 Bill G4WJS.

By Bill Somerville · #19779 ·

Installing Version 2.3.0-rc2 on Big Sur (11.1)

Bill, G4WJS I am trying to install version 2.3.0-rc2 on my Mac running Big Sur (11.1). I am following the instructions in the Read Me file. It says at one point: Now re-boot your Mac. This is

By Bill, W8BC · #19778 ·

Re: My Thanks and some comments on suggestions

Thanks Dave! Made the change earlier today to the frequency, having used Regedit before I knew what I was getting into as the article Dave referenced says you do need to take care and this setting is

By MARTIN LAMPNER · #19777 ·

Re: Hamlib error on ft991.

Thank you all for the suggestions. It seems it was an issue with the com port, unchecking 'use FIFO buffers' solved the problem.

By Chris G4KVI · #19776 ·

Re: My Thanks and some comments on suggestions

Getting Windows to synch correctly is straightforward... Set it for hourly synch: http://noosphere.princeton.edu/time.regedit.html Use a time server from a local geographic pool:

By Dave H · #19775 ·

Re: Hamlib error on ft991.

Bill I don't have a screen shot, but this is the text: Hamlib error: Communication timed out while opening connection to rig Again, I don't think its a WSTJ-X issue. I think its something in the

By Frank Mellott · #19774 ·

Re: Hamlib error on ft991.

George, there are no Hamlib error messages about audio, Hamlib has nothing to do with audio connections between your rig and PC. If you are getting an error message from WSJT-X then please include

By Bill Somerville · #19773 ·

Re: Hamlib error on ft991.

Frank, if you are using flrig to control you rig you will not get Hamlib errors in WSJT-X. Please tell us the exact error message, including details, you are getting from WSJT-X? 73 Bill G4WJS.

By Bill Somerville · #19772 ·

Re: Hamlib error on ft991.

Good affternoon I have been running a Yaesu FTDX-1200 using flrig for cat contol with WSJT-X and JTAlert for a couple years. I get the occasional hamlib error, but today i encountered something I

By Frank Mellott · #19771 ·

Re: Hamlib error on ft991.

Chris, I am having a similar problem with a Hamlig errors using my FT991A. I have WSJT running on my laptop with no issues but it won't run on my main PC - both run Window 7. I can't help you with

By George Nelson <grn@...> · #19770 ·

Re: Call 1st Check Box Sometimes Red

Hi, If on the settings on the General tab you have the Calling CQ Forces Call 1st check box checked, it will turn red when you are calling CQ. 73, Sam W2JDB

By Sam Birnbaum · #19769 ·

Re: UHF / SHF frequencies #WSJTX_config

Hi Ernst Are you in FT8 mode? If so, the frequency table by default only has FT8 frequencies up to and including 144MHz. In other modes, eg JT65, JT4, QRA64 you should have frequencies

By g3wdg <charlie@...> · #19768 ·

Messages