Besides the time issue I did find MS messed with the audio ports last update. Tnx. BillB W7WMB

Long story - longer. Just changed internet providers from T-mobile hot spot to ATT Wireless Internet (we're out in the county - wireless or sat is the only solution). After your comment I checked and

Immediately on the right end of the Input line is a selection box ("drop down") that allows the user to select Mono | Left | Right or Both. Just make sure that Windows initializes your sound card

Tnx for the support! The reason why I want to work via vox control simple I have not cat cables yet. But I had found a old usb cable by clean the shack so I wanted to try. But I’m not an real digi

On 10/12/2020 17:28, David Feldman via groups.io wrote: Hi David, it doesn't sound like you have tried what you want to do, there are no issues with doing the things you wish.

Hello - I have a similar need, although for a different use case - I would like to run two instances of WSJT-X on the same machine (I expect this is another topic; initially I'd like to see if the

Thanks Bill , yes normal did the trick Ed N5DG

Hi Christian! Think of it like the "SQUELCH" on an FM handheld. -1 setting turns the "SQUELCH" OFF. As you increase the Sync Threshold, stronger signals are required before there is any decoding. GL

Hi Dale, That message on very purpose don’t have that option. Otherwise there will be after Jan 19th a lot of questions why today my WSJT-X without any warning stopped to work, I did not do

I recently installed 2.3.0 rc2 to replace 2.2.2 -- in FT Roundup it was crashing. Installing 2.3.0 rc2 fixed that. Now, though, when I oopen 2.3.0, I get a pop-up message telling me this version will

Hi Dale, you probably did not follow the instructions in WSJT-X User Guide correctly, perhaps installing the wrong version of OpenSSL, i.e. 32-bit when you are using teh 64-bit version of WSJT-X, or

Bill Thanks for the information. I upgraded to 2.3.0 rc 2. That seems to have solved the problem. Thank you very much! 73 Greg W4GHW

Hi Ed, decoding carries on independently of any following message transmission. Obviously you may end up changing a transmitted message after you have started sending it, that usually is OK unless

On opening WSJT-X v2.3.0-rc2, I'm getting a pop-up message saying : 'Network Error - SSL/TLS Support not installed, cannot fetch: 'https://lotw.arrl.org/lotw-user-activity.csv' I recently downloaded

Does it make any difference that my computer is still decoding when it go's into transmit . My blue decode light turns blue at 16-49-57 then 2 quick flashing blue . Then the blue light go's off at

Hi Chas, Without knowing your antenna system may I propose use of balun(s), if you have not had any. It looks like a lot of common mode current is flowing on all your installation cables including PC

On 10/12/2020 16:21, w4ghw wrote: Hi Greg, you don't say but I guess that you are using WSJT-X v2.2.2 for WSPR automatic band hopping. That version has a known defect that

Sorry for the sketchy description. Both monitors go black and computer power light is blinking. The only option is to shut the computer off and power it back up. At this point, this may be a

I am getting this error every time I run WSPR after about a few seconds. If you can’t see the JPG it says: Subprocess error Running: C:\WSJT\wsjtx\bin\user_hardware 15 Process failed to start:

On Thu, Dec 10, 2020 at 06:27 AM, Bill Somerville wrote: The next version of WSJT-X v2.3.0, already available for testing as WSJT-X v2.3.0 RC2Bill, Is there any guess when 2.3.0 will released? --