Has anyone noted S and P does not enable tx when used in the latest versions (rc1 and rc2) in v2.3.0? Works fine in 2.2.2 for me. I know it is primarily for contesting in FT4, but I use it with FT4,

Mike and Neil, this is rather biased advice. Although JTAlert is a great companion to WSJT-X, it is not necessarily the only way to log WSJT-X QSOs in DXKeeper. I would recommend getting Commander

To use DXKeeper with WSJT-X for logging, you need an intermediate bridge program. You can use JT-Alert (which has very good DXKeeper integration), GridTracker, or SpotCollector from the

Have been trying to figure out if I can connect DX Keeper, WSJT-x and my 991A together. Do I have to have the Commander running, since it is being very difficult to connect to the radio and I am about

Not quite correct. If you delete log.adi file after uploading to your logging program, you have to delete it, so that you don't duplicate those contacts in your log. That means you have to go and make

I had the same trouble. It is fixed in v2.3.0-rc2 73, Alek, VK6APK

I don’t use HRD or Flex, so your mileage may vary. However, in most standard setups the difference between split and fake it is very simple. Split uses one VFO for transmit and the second VFO for

In reading Gary Hinson's FT8 Operating Guide he says 'there is no need to work simplex' and should configure the Radio tab in WSJT-X Split Operation to Rig or Fake It. I have the Rig set to "Ham

Good one, Bill !! Gary

Thanks. I apparently did not drill down far enough. 73 Roger ZF1RC

On 23/11/2020 7:43 am, Pocket Change via groups.io wrote: The JTAlert Release Notes say "See the "Applications -> WSJT-X / JTDX" section of the Settings window". I don't

Thanks Bill but I cannot find how to access the instruction in the release notes. The path that is given does not show up in "settings". Maybe I need to look with different eyes so I don't miss the

Here isa new one for me. Using an HP Elite 8200SFF desktop with Win 10, I lost the ability to choose my output device in theSystem Sound setting. For the longesttime I simply right clicked on the

Oh dear, I thought Norton only sold their viruses on Windows. 73 Bill G4WJS.

Norton's Anti-Virus and firewall program for the Mac. Mike K0MN

Roger, it is JTAlert doing that, the clue should have been that it started happening when you upgraded JTAlert. See the JTAlert release notes for an explanation. 73 Bill G4WJS.

I am using version 2.2.1 of WSJT-X and suddenly today whenever 73 and RR73 appear in the Band Activity box on the left they are highlighted. I can't see anywhere to turn that off. Is it possible? I

As a follow-up, I have been informed this is not supported if you are using CAT control. I have no need for and do not use CAT on LF or MF, so I was unaware of that. It seems my "solution" may not

Bill, Additional troubleshooting has turned up that the problem goes away if the none is selected for Rig Control disabling CAT to the radio. The rig is a Yaesu FT847. Brad WQ5S -- Brad Fuller WQ5S

Hi Clint, Bill, and all. This was a really big and disappointing change for me as well. If there were no workaround it forced a complete rethinking of operating practices, but no matter how I thought