Hi Randy, you are not the first to report this misbehaviour of the WSJT-X Pwr slider in macOS 10.16 Bug Sur. I am upgrading a macOS VM right now to do some tests and to see if I can find a

Auto Antenna Tune TX WSPR Windows 10 - ICOM 7300 WSJT-X 2.2.1 REFERENCE WSJT-X 2.2. User Guide: 9. WSPR 9.1 Band Hopping Schedule - TUNE ROW BOXES I need

I saw similar posts, but nothing quite like my problem. I am running V2.2.2 with a MacBookAir (2020) and a IC-7300. Connected to logger, MacLoggerDX via DXCommander. Internal USB in rig. I just

Hi Greg, can you share the whole output of the cmake configure command please? 73 Bill G4WJS. On 18/11/2020 20:35, Greg Cook via groups.io

This has been noted by Bill as a REGRESSION and will be fixed in the next release. They are NOT removing this data, just a small BUG .. Neil, KN3ILZ On

Hi Bill, I'm afraid the build failed, but not sure the problem was Boost. I replaced the wsjtx.patch file in the unzipped dir with yours. Part of the error messaging below... -- Performing Test

On Sun, Mar 24, 2019 at 06:02 AM, Bill Somerville wrote: On 24/03/2019 12:57, Bob wrote: Bill, it is not an insurmountable problem, it is a distraction to have the task bar appear unexpectedly, and

I search for records with date and time, my callsign and queried callsign. Please keep this information in all records, and make it a requirement. Date and time especially in the same format. 73

On 18/11/2020 19:32, David Miller wrote: Hi David, try running Wireshark on your WSJT-X PC with a capture filter of "dst port 4739" on your local subnet network interface.

Hi, With apologies, it seems more likely that this is not a WSJT-X problem but rather a Windows configuration problem, but I don't know where else to ask. I'm a new ham (licensed not a month ago) and

Echoed, I process this file to search for a QSO I might have forgotten to log. 73 Phil GM3ZZA. Sent from Mail for Windows 10

I started to rethink this and looked at the IC-7300 block diagram I managed to get hold of (don't ask). The USB Codec is a PCM2901 chip. It takes the audio through an op-amp and some sort of switch or

Amos, Most of what little activity I have seen occurs between about 800 to 1200 so I set Flow at 500 and Fhi at 1300. Start with the NB set to 0, but gradually increase it as you gain experience.

Larry and All In addition: 1. I will call CQ on 19:00, 19:30, 20:00, 20:30, 21:00, 21:00, 21:30 UTC for 15 minutes each time. 2. What shell I do with NB? Join me Amos 4X4MF Larry Starting

Larry Starting now, this evening, 20:55 our time, 18:55 UTC till 22:00 UTC I will be listening on 1839.000 KHz, t/r=60, RX=TX=1200. What shell I do with F Low and F High? From time to time I will

I think these links may

Hi Jim. He may to use something like the IC-7100 for the radio in WSJT-X. Hamlib does not yet have the Xiegu G90 but the Icom 7100 is used by some and seems to be fairly compatible for CAT control

Hi David, I'm not sure why you're having such a problem with FT4 as I find that FT4 usually works as well or better than FT8. When I call stations on FT4 they not only come back to me much faster but

Hi OM, thanks for the issue report. If it is that the vertical height of the WSJT-X main window is restored larger than it was after restarting WSJT-X with that window at minimum or near minimum

Version 2.3.0-RC2. Program opens to the same large size each time even after I resize to fit my screen and close with those settings.