Thanks Laurie. I looked but didn’t see it listed. I am using latest version. 73 Charlie G4EST www.g4est.me.uk Stay safe out there

Part 2... This from the tigertronics website: Radio "flutters" [relay chatters] between transmit and receive - This is caused by an incorrect software volume control setting on your computer. It

Tim, Very incidative of incorrect audio settings allowing system sounds & other audio going to Signalink. 73 - John - N7GHZ

For about the last 2 weeks, during transmit the PTT relay in my Signalink USB starts to chatter. It's on various bands and is intermittent; not with every transmission. Sometimes worse, sometimes not

Thanks Bill. question solved

This is probably a coincidence. The power thing is two states, on or off. If it is on then no problem. That is very likely not the problem. Also true that they do not switch off if they are in use.

Indeed it does. Now, I DID go and follow all the suggestions about possibly mitigating DPC ...suggested by our own Bill. I done-did-em-awl No more VP6. No more Bonjour, and all the other in the list

No USB device? no USB sound card? Robin G1MHU

I did some digging in the Developers forum. This change has been noticed by several members of that Forum. Some others have also seen higher DT number calculations for the same decodes on the two

Hi OM, when you click either of the DTR or RTS fields you get a three item list, click the blank item. 73 Bill G4WJS.

On 1/11/2020 3:55 am, chas cartmel wrote: If you're using JTAlert, you can have it automatically upload to multiple online logs, including HRDLog.net. de Laurie

First let me say thanks for letting me join this group. I accidentally put in a low reading in the DTR of the Force Control Llines and can't seem to remove it. If anybody know how to do it I would

Can you put the HRDlog website in a white list in Kaspersky? 73 Charlie G4EST www.g4est.me.uk Stay safe out there

Pardon my lack of knowledge here, but what is the interface to HRDlog.net? I use HRD (Ham Radio Deluxe) via JTAlert and all is well, but also use HRDlog.net as it has a link to my website. I have to

Does toggling the tick box in Settings>General>Display- Start new period decodes at top sort of do what you're asking? Chuck WV8A

Thank you for the reply. 73 jerry km3k Sent from my Samsung Galaxy smartphone.

On Fri, Oct 30, 2020 at 10:02 PM, Robin Moseley G1MHU wrote: Often the issue can be resolved by switching off the power management of the USB hubs and USB root hubs from windows device manager

Often the issue can be resolved by switching off the power management of the USB hubs and USB root hubs from windows device manager ..(richt click on the windows button in the lower left of the

Update and possible solution on my HRD logging issue. As a recap, I have been using the interface to HRDLog for years and all of a sudden log records were intermittently not being sent to HRDLog.

Hi John, There is a fundamental limitation in presentation order of the decoded signals. The messages a presented in the order of successful decoding and to the end (lowest line) of the list. The is