I'm really beginning to think maybe it would be best to have a dedicated shack computer that you don't do financials on on an older version of Windows or Linux. Windows 10 seems to be a nightmare. I

I agree with Rick. Proper application closure at the end of the day or session and proper computer shut-down procedure is likely key to many problems. Additionally, I've found that some

Hi Peter, you do have to lower your expectations a bit when comparing a single-board computer like a Raspberry Pi with a modern desktop system. For WSJT-X v2.2.2 we tweaked the decode depth

HI, have been running JTDX on my main PC with great success, but want to migrate to the Raspberry PI 4B 2G, when running JTDX on the RPi I am missing every other 15second because the RPi is so slow at

I have noticed consistently higher "DT" values using 2.3.0-rc1. DT values are constantly .2, .3, .4 , .6 and so on while on FT8, FT4 I then regressed to 2.2.2 and the numbers were mostly all 0 or

Back when I was working, I worked for a CAD company and had some of the company’s tools installed on a W7 laptop with a Linux VM to run the tools. I was touring European cities and the tools worked

Hi again Bill I installed WSJT-X V2.2.2 on a clean install of Linux Mint Mate 20.04 fully updated as of today. It was relatively easy. FWIW this is the install sequence:-

These error messages are not being caused by a change in windows. This happens at times when WSJT does not shut down properly. If you open your Task Manager after you get this error you will find a

On Wed, Oct 28, 2020 at 10:26 PM, ve3ki wrote: Windows makes its decisions on power-saving actions like sleep mode based on keyboard and mouse activity. It does not know about activity on serial

Hi Bill V2.2.2 does install on Ubuntu 20.04 based distros. There are quite a few dependencies but they're all available in the Ubuntu archive as deb files and when these are installed

Hi, did you try other communication speeds? I had this problem with my CAT firmware for uSDX and only one speed was 95% successful. On debugging I found communication in a high pace the radio

Hi Hank, Thanks for again showing how ms updates ARE THE MALWARE! NOT JUST for ham radio either! Seems like every few days another tech media outlet tells of horror stories of bricked computers, lost

Funny, with me it happens most of the time after a frequency change. When I see a nice station I push TX, the radio is on TX but no audio. To solve this.... I push tune shortly and after that all

Unfortunately I encounter the same problems. On Windows 10, no screen or any other energy savings enabled. I keep my system turned or for spotting during the night and 24/24. Sometimes WSJT-X v2.2.2

Just a heads if all of a sudden WSJT audio settings go to pot. YMMV This evening I updated to the latest N1MM file - and a few minutes later - the WSJT quit working and was reporting audio issues

Hi Chuck, I am glad to help. Actually it was no secret as it is clearly described in http://physics.princeton.edu/pulsar/k1jt/FT8_DXpedition_Mode.pdf 73, Reino OH3mA

Hi Bill, Again, thanks for the response. No, that’s not the issue here. I have seem that come up on the forum many times. I’ve never used that function so never checked it and just to be

Looks like a false decode. Not unheard of, especially if you use deep decode and/or have Enable AP turned on. I never use AP, but always have Deep turned on and get them now and then. Just ignore

Per K7GQ suggestion, I didn't use my pre-defined F/H config, but set up in Prefer -> Advanced -> Special Operating. It seems to work, no error message.

Anyone know what this is? 005000 -21 0.5 1737 ~ W1EL 2U7DVD/R RA70 I get one every once in a while. Thanks! 73 de W1EL Eric Lowell 48 Loon Rd Wesley, ME