On Wed, Oct 28, 2020 at 10:26 PM, ve3ki wrote: Windows makes its decisions on power-saving actions like sleep mode based on keyboard and mouse activity. It does not know about activity on serial

Hi Bill V2.2.2 does install on Ubuntu 20.04 based distros. There are quite a few dependencies but they're all available in the Ubuntu archive as deb files and when these are installed

Hi, did you try other communication speeds? I had this problem with my CAT firmware for uSDX and only one speed was 95% successful. On debugging I found communication in a high pace the radio

Hi Hank, Thanks for again showing how ms updates ARE THE MALWARE! NOT JUST for ham radio either! Seems like every few days another tech media outlet tells of horror stories of bricked computers, lost

Funny, with me it happens most of the time after a frequency change. When I see a nice station I push TX, the radio is on TX but no audio. To solve this.... I push tune shortly and after that all

Unfortunately I encounter the same problems. On Windows 10, no screen or any other energy savings enabled. I keep my system turned or for spotting during the night and 24/24. Sometimes WSJT-X v2.2.2

Just a heads if all of a sudden WSJT audio settings go to pot. YMMV This evening I updated to the latest N1MM file - and a few minutes later - the WSJT quit working and was reporting audio issues

Hi Chuck, I am glad to help. Actually it was no secret as it is clearly described in http://physics.princeton.edu/pulsar/k1jt/FT8_DXpedition_Mode.pdf 73, Reino OH3mA

Hi Bill, Again, thanks for the response. No, that’s not the issue here. I have seem that come up on the forum many times. I’ve never used that function so never checked it and just to be

Looks like a false decode. Not unheard of, especially if you use deep decode and/or have Enable AP turned on. I never use AP, but always have Deep turned on and get them now and then. Just ignore

Per K7GQ suggestion, I didn't use my pre-defined F/H config, but set up in Prefer -> Advanced -> Special Operating. It seems to work, no error message.

Anyone know what this is? 005000 -21 0.5 1737 ~ W1EL 2U7DVD/R RA70 I get one every once in a while. Thanks! 73 de W1EL Eric Lowell 48 Loon Rd Wesley, ME

As do I. However, there is much information to be had by keeping a close ear to the frequency on receive. Just run it at a very low level. Same for transmit audio if your rig has the capability.

Gary, You would be right, IF I ran wsjtx with the audio up - I don't! I having hearing loss & tinnitus, so sitting there listening to that thing squeal just gives me a headache, so I turn down the

Belay my last. It went for about eight hours with sleep and screensaver disabled. Locked up again. Back to the drawing board. Steve, N4JQQ

I’m not sure how you missed it! You should have been able to hear the fact that you were on the wrong filter, if nothing else. The waterfall would have shown it also, as you finally

Hi Rich and John, that is partially right. For connected devices like serial ports the power save options are not in play as having a connection open is enough to stop power

Hi Rich, The kb & mouse activity is true, but since you need to move & click the mouse to log, & select new stations to operate... the system still isn't picking that up. 73 - John - N7GHZ

I'm big enough to admit when I do dumb stuff... So early this morning, I worked a bunch of FT4 & FT8 & everything worked fine. I then did some experimenting for about half an hour, & after that I went

Windows makes its decisions on power-saving actions like sleep mode based on keyboard and mouse activity. It does not know about activity on serial ports, sound cards, etc. There are settings that can